W5TP4V10024J | Sipin | W5 Series Thyristor Power Regulator (SCR Power Regulator)

Estimated Lead Time : 1 - 10 working days

Manufacturer : Sipin

Part Number : W5TP4V100-24J

W5 Series Thyristor Power Regulator (SCR Power Regulator).

W5: Refers to the W5 Series of power regulators.

T: Indicates a Three-wire, Three-phase control type (without neutral connection).

P: Denotes Phase Angle Control.

4V: Indicates a main power voltage range of 200-480VAC.

100: Represents the Normal Rated Current of 100 Amps.

24: Likely refers to an auxiliary power source of 220VAC (single-phase).

J: Indicates Adjustable Buffering Time (1-22 seconds), a feature specific to phase control products.

Type: 3-Wire, 3-Phase Angle Controller (SCR Power Regulator).

Main Power Voltage: 200 - 480 VAC (Automatic detection for 50-60 Hz).

Normal Rated Current: 100 Amps.

Auxiliary Power Source: 220 VAC.

Control Input Signal: This model supports various input signals, including:

• 4-20mA (common for this specific model)

• 1-5VDC

• 2-10VDC

• 0-20mA

• 0-5VDC

• 0-10VDC

• Dry contact points.

Buffering Time: Adjustable from 1 to 22 seconds (for phase control products only).

Cooling: Fan Cooling.

Dimensions (LxWxH): Approximately 202mm x 140mm x 205mm.

Output Adjustment: Independent adjustment of Max and BIAS. VR for Max and SFS (buffering output adjustment) are installed on the front panel for easy adjustment.

Safety Features:

• Top & bottom shielding covers for safety and easy wiring.

• Immediate system output shut-off during sudden 0.5 Hz power losses.

• Buffering output upon power restoration to prevent voltage surges.

• Automatic detection and display for power out-of-phase, SCR overheating, and fuse burn-down with one set of alarm dry contact output.

• Immediate system output stop in cases of SCR overheating or fuse burn-down.

• Built-in high-speed fuse (extra fuse not necessary).

Display: Multi-LED display panel for clear operating condition indications.

Design: Triggering circuit and main board are designed separately to avoid main board damage. Uses European detachable control signal connector for easy replacement.

Applicable Loading: Fixed resistance loading, variable resistance loading, inductive loading, IR light bulb.

This power regulator is designed for precise control of power to various loads in industrial applications, particularly where three-phase power and angle control are required.

Weight: Approximately 3500 grams (3.5 kg).

Shipping Weight : 5 Kg