TM5SMM6D2L | Schneider Electric | Mixed I/O module, Modicon TM5, module

Estimated Lead Time : 4 - 6 Weeks.

Manufacturer : Schneider Electric

Range of product : Modicon TM5

Product or component type : Mixed I/O module

Range compatibility :

• Modicon LMC058

• Modicon M258

Product compatibility :

• Motion controller

• Logic controller

Discrete input number : 4

Discrete input voltage : 24 V

Discrete input voltage type : DC

Input voltage limits : 20.4...28.8 V

Discrete input logic : Sink

Discrete input current : 3.3 mA

Voltage state 0 guaranteed : <= 5 V

Voltage state 1 guaranteed : >= 15 V

Input filtering :

• <= 2 µs hardware

• 1 ms by default

• <= 25 ms configurable by software

Analogue input number : 1

Analogue input type :

• Voltage, input range: +/- 10 V

• Current, input range: 0...20 mA/4...20 mA

Analogue input resolution :

• 12 bits + sign for voltage

• 12 bits for current

Common mode rejection :

• 70 dB DC for analog input

• 70 dB 50 Hz for analog input

Discrete output number : 2

Discrete output type : Transistor

Output voltage : 24 V DC

Output voltage limits : 20.4...28.8 V

Discrete output logic : Source

Discrete output current :

• <= 0.5 A per output

• <= 1 A

Peak output current : 14 A

Maximum leakage current : 5 µA (when switched off) for digital output

Switching frequency : 100 Hz, resistive for digital output

Analogue output number : 1

Analogue output type :

• Voltage: +/- 10 V

• Current: 0...20 mA

Conversion time : 300 µs for analog output

Analogue output resolution :

• 12 bits + sign, +/- 10 V

• 12 bits, 0...20 mA

Measurement resolution :

• 2.441 mV, +/- 10 V, +/- 10 V

• 4.883 µA, 0...20 mA/4...20 mA, 0...20 mA

Colour : White

Response time :

• <= 250 µs from state 0 to state 1 for digital output

• <= 250 µs from state 1 to state 0 for digital output

• 1 ms for analog output

Input impedance :

• 7.18 kOhm digital

• >= 1 MOhm analog, +/- 10 V

Minimum output impedance :

• 1 kOhm +/- 10 V 0…55 °C

• 10 kOhm +/- 10 V 55…60 °C

Load impedance ohmic :

• <= 400 Ohm (output: 0...20 mA) at 0…55 °C

• <= 300 Ohm (output: 0...20 mA) at 55…60 °C

• <= 300 Ohm (input: 0...20 mA/4...20 mA)

Sampling duration : 300 µs for analog input

Measurement error :

• < 0.08 % of full scale (input: +/- 10 V) at 25 °C

• < 0.08 % of full scale (input: 0...20 mA/4...20 mA) at 25 °C

• < 0.15 % of full scale (output: +/- 10 V) at 25 °C

• < 0.15 % of full scale (output: 0...20 mA) at 25 °C

Temperature coefficient :

• +/- 0.009 %FS/°C (input: 0...20 mA/4...20 mA)

• +/-0.006 %FS/°C (input: +/- 10 V)

• +/- 0.02 %FS/°C (output: 0...20 mA)

• +/- 0.02 %FS/°C (output: +/- 10 V)

Non-linearity :

• +/- 0.02 %FS (input: 0...20 mA/4...20 mA)

• +/- 0.02 %FS (input: +/- 10 V)

• +/- 0.1 %FS (output: 0...20 mA)

• +/- 0.1 %FS (output: +/- 10 V)

Type of cable : Shielded cable

Isolation :

• No insulation between channels

• 500 Vrms AC insulation between channel and bus

Supply : Internal

[Us] rated supply voltage : 24 V DC -15...20 %

Local signalling :

• 1 LED (green) for power supply (ON)

• 1 LED (red) for power supply (OFF)

• 4 LEDs (green) for digital input status

• 2 LEDs (orange) for digital output status

• 1 LED (orange)

• 1 LED (green)

Wiring mode : 1 wire for digital input/output

Current consumption :

• 2 mA at 5 V DC bus

• 73 mA at 24 V DC inputs/outputs

Maximum power dissipation in W : 1.75 W

Protection type :

• Against reverse polarity for digital output

• Against short-circuits for digital output

• Thermal overload protection for digital output

• Against short-circuits for analog output

Marking : CE

Product weight : 0.025 kg

Shipping weight : 1 kg