TM241C24T | Schneider Electric | logic controller, Modicon M241, 24 IO, transistor, PNP

• Estimated Lead Time : 4 - 6 weeks.

• Manufacturer : SchneiderElectric

• logic controller, Modicon M241, 24 IO, transistor, PNP

Main

• Range of product : Modicon M241

• Product or component type : Logic controller

• [Us] rated supply voltage : 24 V DC

• Discrete input number : 14, discrete input 8 fast input conforming to IEC 61131-2 Type 1

• Discrete output type : Transistor

• Discrete output number : 10 transistor 4 fast output

• Discrete output voltage : 24 V DC for transistor output

• Discrete output current

  • 0.5 A for transistor output (Q0...Q9)

  • 0.1 A for fast output (PTO mode) (Q0...Q3)

Complementary

• Discrete I/O number : 24

• Maximum number of I/O expansion module

• 7 (local I/O-Architecture)

• 14 (remote I/O-Architecture)

• Supply voltage limits : 20.4…28.8 V

• Inrush current : 50 A

• Power consumption in W : 32.6…40.4 W (with max number of I/O

• expansion module)

• Discrete input logic : Sink or source

• Discrete input voltage : 24 V

• Discrete input voltage type : DC

• Voltage state 1 guaranteed : >= 15 V for input

• Voltage state 0 guaranteed : <= 5 V for input

• Discrete input current

• 5 mA for input

  10.7 mA for fast input

• Input impedance

• 4.7 kOhm for input

  2.81 kOhm for fast input

• Response time

  • 50 µs turn-on, I0...I13 terminal(s) for input

  • 50 µs turn-off, I0...I13 terminal(s) for input

  • <= 2 µs turn-on, I0...I7 terminal(s) for fast input

  • <= 2 µs turn-off, I0...I7 terminal(s) for fast input

  • <= 34 µs turn-on, Q0...Q9 terminal(s) for output

  • <= 250 µs turn-off, Q0...Q9 terminal(s) for output

  • <= 2 µs turn-on, Q0...Q3 terminal(s) for fast output

  • <= 2 µs turn-off, Q0...Q3 terminal(s) for fast output

• Configurable filtering time

  • 1 µs for fast input

  • 12 ms for fast input

  • 0 ms for input

  • 1 ms for input

  • 4 ms for input

  • 12 ms for input

• Discrete output logic : Positive logic (source)

• Output voltage limits : 30 V DC

• Maximum current per output common

  • 2 A with Q0...Q3 for fast output

  • 2 A with Q4...Q7 for output

  • 1 A with Q8...Q9 for output

• Maximum output frequency

  • 20 kHz for fast output (PWM mode)

  • 100 kHz for fast output (PLS mode)

  • 1 kHz for output

• Accuracy

  • +/- 0.1 % at 0.02…0.1 kHz for fast output

  • +/- 1 % at 0.1…1 kHz for fast output

• Maximum leakage current : 5 µA for output

• Maximum voltage drop : <1 V

• Maximum tungsten load : <2.4 W

• Protection type

  • Short-circuit protection

  • Short-circuit and overload protection with automatic reset

  • Reverse polarity protection for fast output

• Reset time

  • 10 ms automatic reset output

  • 12 s automatic reset fast output

• Memory capacity

  • 8 MB for program

  • 64 MB for system memory RAM

• Data backed up : 128 MB built-in flash memory for backup of user programs

• Data storage equipment : <= 16 GB SD card (optional)

• Battery type : BR2032 lithium non-rechargeable, battery life: 4 year(s)

• Backup time : 2 years at 25 °C

• Execution time for 1 KInstruction

  • 0.3 ms for event and periodic task

  • 0.7 ms for other instruction

• Application structure

  • 4 cyclic master tasks

  • 3 cyclic master tasks + 1 freewheeling task

  • 8 external event tasks

  • 8 event tasks

• Realtime clock : With

• Clock drift : <= 60 s/month at 25 °C

• Positioning functions

  • PTO function 4 channel(s) (positioning frequency: 100 kHz)

  • PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz)

• Counting input number

  • 4 fast input (HSC mode) at 200 kHz

  • 14 standard input at 1 kHz

• Control signal type

  • A/B at 100 kHz for fast input (HSC mode)

  • Pulse/direction at 200 kHz for fast input (HSC mode)

  • Single phase at 200 kHz for fast input (HSC mode)

• Integrated connection type

  • Non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface

  • Non isolated serial link serial 2 with removable screw terminal block connector and RS485 interface

  • USB port with mini B USB 2.0 connector

• Supply : (Serial 1)serial link supply: 5 V, <200 mA

• Transmission rate

  • 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485

  • 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232

  • 480 Mbit/s for bus length of 3 m for USB

• Communication port protocol : Non isolated serial link: Modbus master/slave

• Local signalling

  • 1 LED (green) for PWR

  • 1 LED (green) for RUN

  • 1 LED (red) for module error (ERR)

  • 1 LED (red) for I/O error (I/O)

  • 1 LED (green) for SD card access (SD)

  • 1 LED (red) for BAT

  • 1 LED (green) for SL1

  • 1 LED (green) for SL2

  • 1 LED (red) for bus fault on TM4 (TM4)

  • 1 LED per channel (green) for I/O state

• Electrical connection

  • Removable screw terminal blockfor inputs and outputs (pitch 5.08 mm)

  • removable screw terminal blockfor connecting the 24 V DC power supply (pitch 5.08 mm)

• Maximum cable distance between devices

  • Unshielded cable: <50 m for input

  • Shielded cable: <10 m for fast input

  • Unshielded cable: <50 m for output

  • Shielded cable: <3 m for fast output

• Insulation

  • Between supply and internal logic at 500 V AC

  • Non-insulated between supply and ground

  • Between input and internal logic at 500 V AC

  • Non-insulated between inputs

  • Between fast input and internal logic at 500 V AC

  • Between output and internal logic at 500 V AC

  • Non-insulated between outputs

  • Between fast output and internal logic at 500 V AC

• marking : CE

• Surge withstand

  • 1 kV power lines (DC) common mode conforming to EN/IEC 61000-4-5

  • 1 kV shielded cable common mode conforming to EN/IEC 61000-4-5

  • 0.5 kV power lines (DC) differential mode conforming to EN/IEC 61000-4-5

  • 1 kV relay output differential mode conforming to EN/IEC 61000-4-5

  • 1 kV input common mode conforming to EN/IEC 61000-4-5

  • 1 kV transistor output common mode conforming to EN/IEC 61000-4-5

• Mounting support

  • Top hat type TH35-15 rail conforming to IEC 60715

  • Top hat type TH35-7.5 rail conforming to IEC 60715

  • plate or panel with fixing kit

• Height : 90 mm

• Depth : 95 mm

• Width : 150 mm

• Product weight : 0.53 kg

• Environment

  • Standards

  • ANSI/ISA 12-12-01

  • CSA C22.2 No 142

  • CSA C22.2 No 213

  • EN/IEC 61131-2:2007

  • Marine specification (LR, ABS, DNV, GL)

  • UL 1604

  • UL 508

• Product certifications

  • CULus

  • CSA

  • IACS E10

  • RCM

• Resistance to electrostatic discharge

  • 8 kV in air conforming to EN/IEC 61000-4-2

  • 4 kV on contact conforming to EN/IEC 61000-4-2

• Resistance to electromagnetic fields

  • 10 V/m 80 MHz...1 GHz conforming to EN/IEC 61000-4-3

  • 3 V/m 1.4 GHz...2 GHz conforming to EN/IEC 61000-4-3

  • 1 V/m 2 GHz...3 GHz conforming to EN/IEC 61000-4-3

• Resistance to fast transients

  • 2 kV (power lines) conforming to EN/IEC 61000-4-4

  • 1 kV (serial link) conforming to EN/IEC 61000-4-4

  • 1 kV (input) conforming to EN/IEC 61000-4-4

  • 1 kV (transistor output) conforming to EN/IEC 61000-4-4

• Resistance to conducted disturbances

  • 10 V 0.15...80 MHz conforming to EN/IEC 61000-4-6

  • 3 V 0.1...80 MHz conforming to Marine specification (LR, ABS, DNV, GL)

  • 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)

• Electromagnetic emission

  • Conducted emissions - test level: 120...69 dBµV/m QP ( power lines) at 10…150 kHz conforming to EN/IEC 55011

  • Conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to EN/IEC 55011

  • Radiated emissions - test level: 40 dBμV/m QP class A at 30…230 MHz conforming to EN/IEC 55011

  • Conducted emissions - test level: 79...63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to EN/IEC 55011

  • Radiated emissions - test level: 47 dBμV/m QP class A at 230…1000 MHz conforming to EN/IEC 55011

• Immunity to microbreaks : 10 ms

• Ambient air temperature for operation

  • -10…50 °C (vertical installation)

  • -10…55 °C (horizontal installation)

• Ambient air temperature for storage : -25…70 °C

• Relative humidity

  • 10…95 %, without condensation (in operation)

  • 10…95 %, without condensation (in storage)

• IP degree of protection : IP20 with protective cover in place

• Pollution degree : 2

• Operating altitude : 0...2000 m

• Storage altitude : 0…3000 m

• Vibration resistance

  • 3.5 mm at 5…8.4 Hz on symmetrical rail

  • 3 gn at 8.4…150 Hz on symmetrical rail

  • 3.5 mm at 5…8.4 Hz on panel mounting

  • 3 gn at 8.4…150 Hz on panel mounting

• Shock resistance : 15 gn for 11 ms

• Shipping Weight : 1 Kg