STG840-E1GS4A-1-C-DHB-11S-B-21A0-F1,F5,GA | Honeywell | STG800 Gauge Pressure Transmitters

Estimated Lead Time : 8 - 12 Weeks

Manufacturer : Honeywell

Part Number : STG840-E1GS4A-1-C-DHB-11S-B-21A0-F1,F5,GA

STG800 Gauge Pressure Transmitters

STG840 : Dual Head

• URL/Max Span : 500 (35)

• LRL : -14.7 (-1.0)

• Min Span : 5 (.35)

• Units : psi (bar)

Process Head & Diaphragm Materials : E = 316 Stainless Steel / 316 Stainless Steel1 c | 316L SS

Fill Fluid : 1 = Silicone Oil 200

Process Connection : G = 1/2" NPT (female) | Same as Process Head 1 a

Bolt/Nuts Materials : S = 316 SS 

Vent/Drain Type/Location : 4

• Head Type : Dual Ended

• Vent Type : Standard Vent

• Location : End

• Vent Material : Matches Head Material1

Gasket Materials : A = Teflon® or PTFE (Glass Filled)

Head/Connect Orientation : 1 = Standard | High Side Left, Low Side Right2 / Std

Approvals : C = ATEX Explosion proof, Intrinsically Safe & Non-incendive

Electronic Housing Material & Connection Type : D

• Material : Polyester Powder Coated Aluminum

• Connection : M20

• Lightning Protection : Yes

Output/ Protocol : H = Analog Output: 4-20mA dc | Digital Protocol: HART Protocol

Customer Interface Selections : B = N/A

Application Software : 1 = Standard Diagnostics

Output Limit, Failsafe & Write Protect Settings : 1 = Disabled | High> 21.0mAdc | Honeywell Std (3.8 - 20.8 mAdc)

General Configuration : S = Factory Standard

Accuracy and Calibration : B = Standard | Custom (Unit Data Required) | Single Calibration

Mounting Bracket : 2 = Bracket Type: Angle Bracket | Material: 304 SS

Customer Tag : 1 = One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)

Unassembled Conduit Plugs & Adapters : A0 = No Conduit Plugs or Adapters Required

Certifications & Warranty : F1 | F5 | GA

F1 = Calibration Test Report & Certificate of Conformance (F3399)

F5 = Certificate of Origin (F0195)

GA = N/A

Weight : 8.3 pounds (3.8 Kg)

Shipping Weight : 5 Kg