SD218PU20C | Schneider Electric | Motion Stepper Drive

Estimated Lead Time : 1-10 working days.

Manufacturer : Schneider Electric

Product no. : SD218PU20C

Product type : Motion stepper drive

Range of product : Lexium SD2

Communication interface : RS485

Network number of phases : Single phase

[Us] Rated supply voltage : 24...48 V

Supply voltage type : DC

Supply voltage limits : 12…48 V

Maximum motor phase current : 3 A

Current consumption : <= 3.2 mA

Voltage state 0 guaranteed : 0...0.8 V for general purpose I/O defined as inputs

Voltage state 1 guaranteed : 2.2...24 V

Input current : 1.75 mA - high level for general purpose I/O defined as inputs

Output current : 600 mA - single channel, duty cycle = 0.8 for general purpose I/O defined as outputs
275 mA - four channels, continuous for general purpose I/O defined as outputs

Input voltage : 0...24 V for general purpose I/O defined as inputs
0...24 V for general purpose I/O defined as outputs
residual ripple : 2 V at nominal voltage

Electrical connection : 1 connector wire crimp 4 pins for motor interface
1 connector wire crimp 16 pins for supply voltage and
multifunction interface
1 connector wire crimp 10 pins for communication interface

Transmission rate : 4.8, 9.6, 19.2, 38.4, 115 kbauds

Type of cooling : Convection, Conduction

Marking : CE

IP degree of protection : IP20

Dimensions (D x W x H) : 5.9 x 4.5 x 3.3

Weight : 0.08 kg

Shipping Weight : 2.1 Kg