RM35TM250MW | Schneider Electric | Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

• Estimated Lead Time : 4 - 6 weeks.

• Manufacturer: Scheinder Electric

• Part number: RM35TM250MW

• Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

Main

• Range of product : Harmony Control Relays

• Product or component type : 3-phase control relay

• Relay type : Motor temperature control relay

• Product specific application : For 3-phase supply

• Relay name : RM35TM

• Relay monitored parameters

  • Phase failure detection

  • Phase sequence

  • Test/reset button

  • Motor temperature via PTC probe

  • Selection (with or without memory)

• time delay : Fixed 0.3 s

• Switching capacity in VA : 1250 VA

• Measurement range

  • 208...480 V voltage AC

  • 0...20 Ohm short-circuit detection

• contacts type and composition : 2 NO

• [Uc] control circuit voltage : 24...240 V

Complementary

• Reset time : 10000 ms output

• Maximum switching voltage

  • 250 V AC

  • 250 V DC

• Minimum switching current : 10 mA at 5 V DC

• Maximum switching current

  • 5 A AC

  • 5 A DC

• Supply voltage limits

  • 20.4…264 V AC

  • 20.4…264 V DC

• Power consumption in VA : 0…4 VA at 24...240 V AC

• power consumption : 0.5 W DC

• control circuit frequency : 50...60 Hz +/- 10 %

• Resistance across terminals : 602 mOhm

• Output contacts : 2 NO

• Nominal output current : 5 A

• Measurement voltage limits : 176…528 V AC

• delay at power up : 500 ms

• Voltage range : 176...528 V

• Response time : > 50 ms (input Y1 (contact Y1-T1) and push-button)

• [Uc] control circuit voltage : <= 3.6 V of temperature control circuit (T1-T2 terminals open)

• Short-circuit current : 0.007 A temperature sensing circuit (T1-T2 terminals short circuited)

• Maximum resistance : 1500 Ohm for temperature sensor at 20 °C

• Tripping threshold : 3100 Ohm +/- 10 % for temperature control circuit

• Reset threshold : 1650 Ohm +/- 10 % for temperature control circuit

• Marking : CE

• Overvoltage category : III conforming to IEC 60664-1

• Insulation resistance

  • > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5

  • > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1

  • > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5

  • > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1

  • > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5

  • > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1

• [Ui] rated insulation voltage : 400 V conforming to IEC 60664-1

• Supply frequency : 50/60 Hz +/- 10 %

• Operating position : Any position without derating

• Connections - terminals

  • Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end

  • Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end

  • Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end

  • Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end

• Tightening torque : 0.6…1 N.m conforming to IEC 60947-1

• Housing material : Self-extinguishing plastic

• Local signalling

  • LED (green) for power ON

  • LED (yellow) for phase of relay (R2)

  • LED (yellow) for temperature of relay (R1)

• Mounting support : 35 mm symmetrical DIN rail conforming to EN/IEC 60715

• Electrical durability : 10000 cycles

• Mechanical durability : 30000000 cycles

• Operating rate : <= 360 operations/hour full load

• Utilisation category

  • AC-12 conforming to IEC 60947-5-1

  • AC-13 conforming to IEC 60947-5-1

  • AC-14 conforming to IEC 60947-5-1

  • AC-15 conforming to IEC 60947-5-1

  • DC-12 conforming to IEC 60947-5-1

  • DC-13 conforming to IEC 60947-5-1

• Width : 35 mm

• Net weight : 0.13 kg

• Shipping Weight : 1 Kg