R4348B1008 | Honeywell | Flamesafeguard Controller (THIS PRODUCT HAS BEEN DISCONTINUED AND NO REPLACEMENT)

Manufacturer : Honeywell

Product no : R4348B1008

Product type : Flamesafeguard Controller

Electrical Rating: Can Operate on 110Vac, 120Vac, 220Vac, 240Vac

Standard Model

Estimated Lead Time: 6 - 8 Weeks

The R4348B is a flame switch for continuous operation to indicate
presence or absence of a flame and to be applied in large commercial
or industrial burner installations.

The R4348B includes a 3-pole flame relay which is energized when flame is
sensed and de-energized when "no-flame" is sensed as well as a 3-pole line
voltage "load relay". For all type of burners with unlimited capacity.

Approvals: CE approved according EN298 (for continuous operation)

Protection class: IP40

Ambient temperature: -20...60C

Maximum humidity: 90%rh

R4348B provides potential free relay outputs enable Honeywell sensors
and amplifiers to be used with a wide range of logic circuits according
to customer needs, including a Safe Start function which checks if a flame signal
is present at burner start.

Accepts all flame rods or all Honeywell C7012, C7027, C7035, C7044,
C7061 and C7076 optical flame detectors, by selecting the correct plug-in
flame amplifier.

The R4348B (with rectification amplifier) will operate also with the
"former Satronic" • IRD820/1020 range of infrared sensors. Note that this
combination is NOT CE approved for use in installations that fall under
the GAD (Gas Appliances Directive).

Note: Order mounting/wiring sub base separately.

Outputs: 3xSPST + 2xDPDT

Operation: Flame switch

Flame failure response time: 1,0/2,0s

Flame detector: Depends on plug-in amplifier

All models

Comment: Standard Model

Shipping Weight: 2.5 kg