NR4-MNPNNNNN | Nippo | Temperature Controller * SAME DAY DELIVERY - 3 UNIT ONLY*

Same Day Shipping

Product Category: Digital Temperature Controller.

Model Series: NR Series (a standard series of digital controllers).

Size (NR4): The '4' in NR4 indicates the DIN standard size of the unit:

Dimensions: 48×48×76mm.

Display: Features a large, easy-to-read LED display for both the measured value (PV, typically in red) and the set value (SV, typically in green).

M - Control Output 1 : Relay contact output (Standard) Used for controlling the heating/cooling element.

N - Control Output 2 : None (Standard) This unit only has one control output.

P - Sensor Input : Multi-Input This feature allows the unit to accept a variety of sensor types, including:

Thermocouple (K, J, T, E, R, S, B) and RTD (Pt100), as well as Current (DC 4-20mA/DC 0-20mA) or

Voltage (DC 1-5V/DC 0-5V) signals.

N - Alarm Output 1 (ALM1) : Relay contact output (Standard) Used to trigger an external alarm or

action if the temperature goes outside the set range.

N - Alarm Output 2 (ALM2) : None (Standard)

N - Transmission Output None (Standard) :No analog re-transmission of the measured value is included.

N - Heater Failure Alarm : None (Standard) : No built-in heater failure detection.

N - Event Input None (Standard) : No external digital input to change settings or modes.

N - Serial Interface : None (Standard) : No RS485/Modbus or other communication interface.

48 X 48 X 76mm

RS485 serial interface (initial factory setting only): None

Front face panel: Black

Shipping Weight: 1.1 kg