NA2-N12-PN | panasonic | General Purpose & Slim Body Area Sensor NA2-N SERIES
NA2-N12-PN | panasonic | General Purpose & Slim Body Area Sensor NA2-N SERIES

NA2-N12-PN | panasonic | General Purpose & Slim Body Area Sensor NA2-N SERIES

0
0
5
USD533.00
Estimated Lead Time : 1 - 10 Working Days
NA2-N12-PN
Panasonic

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.

Condition : Brand New

Warranty : 12 months 

NII REF No : IAFD110411111120
  • Estimated Lead Time : Usually ships in 1 - 10 working days.

  • Manufacturer : Panasonic

  • Model No : NA2-N12-PN

  • Number of beam channels : 12

  • Sensing height : 220 mm 8.661 in

  • PNP output

  • PNP open-collector transistor
    • Maximum source current: 100 mA
    • Applied voltage: 30 V DC or less (between output and +V)
    • Residual voltage: 2 V or less (at 100 mA source current)

  • 1 V or less (at 16 mA source current)

  • Job indicator ON : 0.8 W or less

  • Job indicator OFF : 0.7 W or less

  • Net weight: 400 g approx

  • Gross weight: 600 g approx

  • Utilization category : DC-12 or DC-13

  • Output operation : ON when all beam channels are received (OFF when one or more beam channels are interrupted)

  • Short-circuit protection : Incorporated

  • Indicators

  • Emitting indicator: Green LED × 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)

  • Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)

  • Operation indicator: Red LED (lights up when one or more beam channels are interrupted)

    Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)

  • Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)

  • * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the

    receiver blink simultaneously due to operation of the short-circuit protection circuit.

  • Response time : 10 ms or less (12 ms or less when the interference prevention function is used)

  • Sensing range : 5 m 16.404 ft

  • Beam pitch : 20 mm 0.787 in

  • Sensing object : ø30 mm ø1.181 in or more opaque object (completely beam interrupted objects)

  • Supply voltage : 12 to 24 V DC ±10 % Ripple P-P 10 % or less

  • Interference prevention function : Incorporated

    Test input (emission halt) function : Incorporated

  • Environmental resistance

  • Pollution degree : 3 (Industrial environment)

  • Protection : IP40 (IEC)

  • Ambient temperature : –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –10 to +60 °C +14 to +140 °F

  • Ambient humidity : 35 to 85 % RH, Storage: 35 to 85 % RH

  • Ambient illuminance : Incandescent light: 3,000 lx at the light-receiving face

  • EMC : EN 60947-5-2

  • Voltage withstandability : 1,000 V AC for one min. between all supply terminals connected together and enclosure

  • Insulation resistance : 20 M?, or more, with 250 V DC megger between all supply terminals connected together and

    enclosure

  • Vibration resistance : 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each

  • Shock resistance : 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each

  • Emitting element : Infrared LED (Peak emission wavelength: 950 nm 0.037 mil, modulated)

  • Material : Enclosure: Heat-resistant ABS, Lens cover: Polyester, Indicator cover: Acrylic

  • Cable : 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long

  • Cable extension : Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable

  • Shipping Weight : 2.5 Kg

[short_review]
[long_review]
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
[rating]
There are no reviews for this product!

Reward Points

533 points will be rewarded to you when you buy this item.

Related Items

Feature 5

RMB788PRICE RMB/6.5=USDX4.4=RMX1.4SELLING PRICE

Recently Viewed Items

Legal Disclaimer

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.