HC2-H AC220-240 | Matsushita by Panasonic | General Purpose Power Relay (WITHOUT box) * SAME DAY DELIVERY - 1 UNIT ONLY*

Same Day Shipping

Manufacturer : Matsushita by Panasonic

Part Number : HC2-H AC220-240

HC: Denotes the HC Series of miniature relays, known for their versatility in switching a range of loads from low level to medium power.

2: Specifies the Contact Form. This number indicates 2 Form C contacts, which is also known as a Double-Pole, Double-Throw (DPDT) configuration. This means the relay has two separate sets of contacts, and each set can switch between a Normally Open (NO) and a Normally Closed (NC) position.

-H: Indicates the Plug-in Type terminal arrangement, designed to be inserted into a corresponding socket for easy replacement and connection.

AC220-240: Specifies the Nominal Coil Voltage. This is the voltage required to activate (energize) the relay's coil and switch the contacts. The coil is designed to operate on an Alternating Current (AC) voltage range of 220 V to 240 V at 50/60 Hz.

HC2-H AC220-240 relay is a robust component commonly used in industrial and commercial control systems.

Type : General Purpose Power Relay - Used for switching higher power loads in control circuits.

Contact Form : DPDT (2 Form C) - Two poles, each with both a normally open and normally closed contact.

Nominal Coil Voltage : 220–240 V AC - The voltage applied to the coil to energize the relay.

Max Contact Current : 7 A (Amps) - The maximum current the contacts are rated to switch.

Max Switching Voltage : 250 V AC - The maximum voltage the contacts can safely switch.

Termination : Plug-in / Quick Connect - Designed to be mounted in a compatible socket.

Net Weight : 30 grams (or approximately 1.06 oz)

Shipping Weight : 1 Kg