Estimated Lead Time : Usually ships in 1 - 10 working days.
Manufacturer : Mitsubishi Electric
Product No : FX2N-16EYR
Product type : Output Expansion Block
Application sequencer FX1N, FX3G, FX2N, FX3U, FX1NC, FX3GC, FX2NC, FX3UC <Connecting to connector type sequencer> FX2NC - CNV - IF is required for connection to FX1NC and FX2NC. To connect to FX3GC, FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required.
Power supply specification
Rated voltage Internal power supply from the sequencer
Output specification
Number of output points 16 points
Output connection shape Vertical terminal block (M3 screw)
Output type / format relay
External power supply AC 250 V DC 30 V or less
Maximum load Resistive load Total load current of 2A / 1 point common per resistance load should be as follows. · Output 4 points / common: 8 A or less · Output 8 points / common: 8 A or less
Maximum load Inductive load 80VA
Minimum load DC 5 V 2 mA (reference value)
Response time (OFF ? ON) About 10 ms
Response time (ON ? OFF) About 10 ms
Circuit insulation Mechanical insulation
Output operation indication When the relay coil is energized LED on the panel is lit
Ambient temperature 0 to 55 ° C. ··· Operating -25 to 75 ° C. ····· Save
Relative humidity 5 to 95% RH (noncondensing) · · · · in operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Anti-vibration When DIN rail is installed Frequency: 57 to 150 Hz Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (total of 80 minutes each) The criterion is based on IEC 61131-2
Anti-vibration Direct installation Frequency: 10 to 57 Hz One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Anti-vibration Direct installation Frequency: 57 to 150 Hz Acceleration: 9.8 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Impact resistance 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2
Noise immunity Noise voltage with 1,000 Vp-p, noise width 1 µs, rising 1 ns, with noise si
tor with period of 30 to 100 Hz
Withstand voltage Between the output terminal (relay) and the earth terminal of the expansion output block: AC 1500 V for 1 minute
Insulation resistance Between the output terminal (relay) and the earth terminal of the expansion output block: 5 MO or more with DC 500 V insulation resistance meter
Use atmosphere There is no corrosive property, flammable gas, conductive dust (dust) is not serious
Use altitude Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.
Weight : 0.3 Kg
Shipping Weight : 1.5 Kg