Estimated Lead Time : 4-6 Weeks
Manufacturer : BECKHOFF
Part Number : EK1828
EtherCAT Coupler with integrated digital inputs/outputs
Task within EtherCAT system : coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium : Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations : max. 100 m (100BASE-TX)
Number of EtherCAT Terminals : up to 65,534
Protocol : EtherCAT
Delay : approx. 1 µs
Data transfer rates : 100 Mbit/s
Bus interface : 2 x RJ45
Nominal voltage : 24 V DC (-15 %/+20 %)
Current supply E-bus : 1000 mA
Current consumption from UP : 40 mA + load
Current consumption from US : 100 mA + (∑ E-bus current/4)
Number of inputs : 4
Specification : EN 61131-2, type 1/3
“0” signal voltage : -3…+5 V (EN 61131-2, type 1/3)
“1” signal voltage : 11…30 V (EN 61131-2, type 3)
Input filter : 3.0 ms
Input current : typ. 3 mA (EN 61131-2, type 3)
Number of outputs : 8
Load type : ohmic, inductive, lamp load
Max. output current : 0.5 A (short-circuit proof) per channel
Short-circuit current : typ. < 2 A
Reverse voltage protection : yes
Breaking energy : < 150 mJ/channel
Switching times : typ. TON: 60 µs, typ. TOFF: 300 µs
Electrical isolation : 500 V (power contact/supply voltage/Ethernet), 500 V (E-bus/field potential)
Operating/storage temperature : -25…+60 °C/-40…+85 °C
Relative humidity : 95 %, no condensation
Vibration/shock resistance : conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission : conforms to EN 61000-6-2/EN 61000-6-4
Protect.rating/installation pos. : IP20/variable
Approvals/markings : CE, UL
Design form : HD (High Density) housing with signal LEDs
Material : polycarbonate
Dimensions : (W x H x D) 44 mm x 100 mm x 67 mm
Installation : on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of : double slot and key connection
Marking : labeling of the BZxxx series
Wiring : solid conductors (e): direct plug-in technique; fine-stranded conductors (f) and ferrule
(a): spring actuation by screwdriver
Connection cross-section :
s*: 0.08…1.5 mm²,
st*: 0.25…1.5 mm²,
f*: 0.14…0.75 mm²
Connection cross-section AWG :
s*: AWG 28…16,
st*: AWG 22…16,
f*: AWG 26…19
Stripping length : 8…9 mm
Current load power contacts : Imax: 10 A
*s: solid wire; st: stranded wire; f: with ferrule
Shipping weight : 5 kg