EJA430E-DAS4G-31ED/FF1/D3/S2/C1/T01| Yokogawa | Gauge Pressure Transmitter

Estimated Lead Time : 2 - 4 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-DAS4G-31ED/FF1/D3/S2/C1/T01

Product type : Gauge Pressure Transmitter

EJA430E : Gauge pressure transmitter

D - Output signal : 4 to 20 mA DC with digital communication (BRAIN protocol)

A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST 

Vent/Drain plug : 316 SST

4 - Process connections : with 1/2 NPT female process connector

G - Bolts and nuts material : 316L SST

3 - installation : Vertical piping, right side high pressure, and process connection down side

1 - Amplifier housing : Cast aluminum alloy

E - Integral indicator : Digital indicator with the range setting switch (push button)

D - Mounting Bracket : 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

FF1 - Factory Mutual (FM) : FM Explosionproof Approval *1 Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250 Explosionproof for Class I, Division 1, Groups B, C and D, Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G, in Hazardous locations, indoors and outdoors (Enclosure: Type 4X) “FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.” Temperature class: T6, Amb. Temp.: –40 to 60°C (–40 to 140°F)

D3 - Calibration units : bar calibration (bar unit)

S2

C1 - Output limits and failure operation : Failure alarm down-scale : Output status at CPU failure and hardware error is -5%, 3.2mA DC or less for 4 to 20 mA output type, and -5%, 0.8V DC or less for 1 to 5 V output type.

T01 - Pressure test/ Leak test certificate : Test Pressure: 3.5 MPa (500 psi)

Shipping weight : 8 Kg