13% off
 EJA210A-EMHA1F4B-97DN/D4/T/M13/T36/N4 | Yokogawa | Flange Mounted Differential Pressure Transmitters (Stop Production. New Replacement : EJA210E-JMS4G-917DN-WA13C2HW00-B/D4/TF1/M1W/T52/N4)
EJA210A-EMHA1F4B-97DN/D4/T/M13/T36/N4 | Yokogawa | Flange Mounted Differential Pressure Transmitters (Stop Production. New Replacement : EJA210E-JMS4G-917DN-WA13C2HW00-B/D4/TF1/M1W/T52/N4)

EJA210A-EMHA1F4B-97DN/D4/T/M13/T36/N4 | Yokogawa | Flange Mounted Differential Pressure Transmitters (Stop Production. New Replacement : EJA210E-JMS4G-917DN-WA13C2HW00-B/D4/TF1/M1W/T52/N4)

0
0
5
USD2,108.00
USD2,424.20
USD316.20(13%)
EJA210A-EMHA1F4B-97DN/D4/T/M13/T36/N4
Yokogawa

NII REF No : IWAI112211091120
  • This product has been replaced with EJA210E-JMS4G-917DN-WA13C2HW00-B/D4/TF1/M1W/T52/N4 : EJA210E Flange Mounted Differential Pressure Transmitter

  • Product Number : EJA210A-EMHA1F4B-97DN/D4/T/M13/T36/N4

  • Manufacturer : Yokogawa

  • Model Description : EJA210A Flange-mounted differential pressure transmitter

  • Output signal
    E : 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00EN)

  • Measurement span (Capsule)
    M : 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}

  • High pressure side (Process flange side) wetted parts material
    H :[Diaphragm]: Hastelloy C-276/[Others] : Hastelloy C-2764

  • Process flange range
    A1 : ANSI Class 150

  • Process flange size/material
    F : 3-inch (80 mm) / SUS3165

  • Low pressure side process connection
    4 : with 1/2NPT female process connector

  • Bolts and nuts material
    B : SUS630

  • Installation
    9 : Horizontal impulse piping type, left side high pressure

  • Electrical connection
    7 : 1/2 NPT female, two electrical connections and a blind plug

  • Integral indicator
    D : Digital indicator
    N : Always N

  • Optional codes
    D4-Process flange rating : DIN PN25/40

  • T-Teflon film : Diaphragm protection from sticky process fluid by FEP Teflon film attached with fluorinated oil.
    Operation range: 20 to 120°C, 0 to 2 MPa (Not applicable for vacuum service).

  • M13-Mill Certificate/For model EJA210A
    High pressure side: Process flange, Block *14
    Low pressure side: Cover flange, Process connector

  • T36-Pressure test/Leak test Certificate : ANSI/JPI Class 150 3 MPa{29.8 kgf/cm2}

  • N4-Wired tag plate : Stainless steel tag plate wired onto transmitter

  • /T : Factory Mutual

  • FM Explosionproof Approval6, 7, 8
    Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250
    Explosionproof for Class I, Division 1, Groups B, C and D
    Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
    Hazardous (classified) locations, indoors and outdoors (NEMA 4X)
    Temperature class: T6
    Teflon film9
    Diaphragm protection from sticky process fluid by FEP Teflon film attached with fluorinated oil.
    Operation range: 20 to 120°C, 0 to 2 MPa (Not applicable for vacuum service).

  • The * marks indicate the most typical selection for each specification. Example: EJA210A-DMWA1A5A-92NN/ .
    The # marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.

  • (1) Low pressure side wetted parts material: Cover flange; SCS14A, Process connector; SCS14A, Capsule; SUSF316L, SUS316L or ASTM grade 316L (Diaphragm; Hastelloy C-276 or ASTM
    N10276), Vent plug; SUS316 or ASTM grade 316
    (2) Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process
    fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid
    can contaminate the user s process fluids.
    Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above).
    Contact Yokogawa for detailed information of the wetted parts material.
    (3) SUS316 or ASTM grade 316.
    (4) Hastelloy C-276 or ASTM N10276.
    (5) SUS316 or ASTM grade 316. Forged version may be used.
    (6) Applicable for Electrical connection code 2, 7 and C (1/2 NPT female).
    (7) Applicable for Output signal code D and E.
    For intrinsically safe approval, use the safety barrier certified by the testing laboratories (BARD-400 is not applicable).
    (8) Lower limit of ambient temperature is 15°C (5°F) when /HE is specified.
    (9) Teflon film can only be specified for model EJA210A.

  • Shipping Weight : 12 Kg

[short_review]
[long_review]
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
[rating]
There are no reviews for this product!

Reward Points

2108 points will be rewarded to you when you buy this item.

Related Items

Feature 5

PRICE *1.5

Recently Viewed Items

Legal Disclaimer

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.