EJA118N-DMSA22JB-AB0692DB/FF1/D4 | Yokogawa | EJA118N Diaphragm Sealed Differential Pressure Transmitters

Estimated Lead Time : 2 - 3 weeks.

Manufacturer : Yokogawa

Product No. : EJA118N-DMSA22JB-AB0692DB/FF1/D4

Product type : EJA118N Diaphragm Sealed Differential Pressure Transmitter (Extended diaphragm type)

Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span (capsule) : M = 2.5 to 100 kPa {250 to 10000 mmH2O}{10 to 400 inH2O}{25 to 1000 mbar}

Wetted parts materia : S = JIS SUS316L Diaphragm, JIS SUS316 Pipe, JIS SUS316 Others

Process flange rating : A2 = ANSI Class 300

Diaphragm extension length (X2) : 2 = X2 = 50 mm

Process flange size / material : J = 4-inch (100 mm) / JIS SUS316

Cover flange bolts material : B = JIS SUS630

Fill fluid : A = For general use (silicone oil), -10 to 250 °C Process temp, -10 to 60 °C Ambient temp.

B = Always B

Capillary length (m) : 06 = 6m

Installation : 9 = Horizontal impulse piping type, left side high pressure

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicato

Mounting bracket : B = JIS SUS304 2-inch pipe mounting (flat type)

Factory Mutual (FM) : FF1 = FM Explosionproof Approval *1 *3 *4 Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250 Explosionproof for Class I, Division 1, Groups B, C and D Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G Hazardous (classified) locations, indoors and outdoors (NEMA 4X) Division 2, ‘SEALS NOT REQUIRED’, Temp. Class: T6 Amb. Temp.: –40 to 60°C (–40 to 140°F)

Calibration units : D4 = M calibration (kgf/cm2 unit)

Shipping Weight : 30 Kg