EJA110E-FMS5G-91CDJ/KS26/D1/X2/A/M01/T12/HC | Yokogawa | EJA110E Differential Pressure Transmitter

Estimated Lead Time : 6 - 8 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-FMS5G-91CDJ/KS26/D1/X2/A/M01/T12/HC

Product type : EJA110E Differential Pressure Transmitter

EJA110E : Differential pressure transmitter

Output signal : F = Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C31T02-01EN)

Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket, 316 SST Vent/Drain plug

Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug

Integral indicator : D = Digital indicator

Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

KS26

Calibration units : D1 = P calibration (psi unit)

Painting Coating change : X2 = Anti-corrosion coating

Lightning protector : A = Transmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type.) Allowable current: Max. 6000 A (1×40 µs), Repeating 1000 A (1×40 µs) 100 times Applicable Standards: IEC 61000-4-4, IEC 61000-4-5

Material certificate : M01 = Cover flange

Pressure test/ Leak test certificate : T12 = Test Pressure: 16 MPa(2300 psi), Nitrogen(N2) Gas, Retention time: one minut

316 SST exterior parts : HC = 316 SST zero-adjustment screw and setscrews

Weight : 2.8 Kg

Shipping weight : 8 Kg