DL100-23AA2101 | SICK Sensors | Long range Distance sensors/ Dx100 / DL100 Pro, Part number : 1052696

Estimated Lead Time : 6 - 8 Weeks

Manufacturer : SICK Sensors

Part Number : DL100-23AA2101

Supply voltage V_s : DC 18 V ... 30 V, limit values

Ripple : 5 V_pp ¹⁾

Initialization time : Typ. 1.5 s ²⁾

Housing material : Aluminum/zinc die-cast

Connection type : Male connector, M12, SPEEDCON™ compatible

Indication : 6 digit 5 x 7 dot matrix display, LEDs

Weight : Approx. 800 g ... 1,600 g ³⁾

Current consumption : At 24 V DC < 250 mA

Modulation frequency : Fix

Enclosure rating : IP65

Protection class : III

¹⁾ May not fall short of or exceed V_S tolerances.

²⁾ After loss of reflector < 40 ms.

³⁾ Without mounting bracket : approx. 800 g, with mounting bracket : approx. 1,600 g.

Measuring range : 1.05 m ... 300 m, on reflective tape "Diamond Grade"

Target : Reflector

Resolution : 1.0 mm, 1.025 mm, 1 mm, 10 mm, 100 mm

Repeatability : 2 mm ¹⁾

Accuracy : ± 3 mm ²⁾

Response time : 2 ms

Measurement cycle time : 1 ms ³⁾

Output time : 1 ms, measurement cycle synchronous to PLC request

Light source : Laser, red ⁴⁾

Laser class : 2, complies with 21 CFR 1041.00 and 1041.01 except for the tolerance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1 : 2014, EN 60825-1 : 2014)

Typ. light spot size (distance) : 5 mm (+ 2 mm x distance in m)

Max. movement speed : 15 m/s

Acceleration (max.) : = 15 m/s²

¹⁾ Statistical error 1 s, environmental conditions constant, min. warm-up time 10 min.

²⁾ From 150 mm ... 180 mm measuring range the accuracy can reach ± 4 mm.

³⁾ Measurement cycle synchronous to PLC request.

⁴⁾ Average service life : 100,000 h at T_U = +25 °C.

SSI : yes

Number : 2 ¹⁾

Type : Push-pull : PNP/NPN

Function : Distance : Distance switching output; Speed; Speed output; Service : Warning message as the sensor ages, if the damping value is exceeded (for example when contaminated, if the permitted interior device temperature is exceeded or undercut, if the measured value has a plausibility error, if the laser is not ready for operation, if the heating is switched on; Laser off; Preset

Maximum output current I_A : = 100 mA ²⁾

Multifunctional input (MF) : 1 x MF1 ³⁾

¹⁾ HIGH = > V_S - 3 V / LOW = < 2 V.

²⁾ Max. 100 nF/20 mH.

³⁾ HIGH > 12 V / LOW < 3 V.

Ambient data

Electromagnetic compatibility (EMC) : EN 61000-6-2, EN 61000-6-4 ¹⁾

Ambient temperature operation :–20 °C ... +55 °C ²⁾–20 °C ... +75 °C, operation with cooling case ²⁾

Ambient storage temperature : –40 °C ... +75 °C

Effect of air pressure : 0.3 ppm/hPa

Effect of air temperature : 1 ppm/K

Temperature drift : Typ. 1.0 mm/K

Typ. Ambient light immunity : = 100,000 lx

Mechanical load :Shock : (EN 600 68-2-27)Sine : (EN 600 68-2-6)Noise : (EN 600 68-2-64)

¹⁾ This is a Class A device. This device can cause radio interference in living quarters.

²⁾ Temperatures < –10 °C require warm-up time of typ. 7 minutes.