Estimated Lead Time : 1 - 10 working days
Manufacturer : Schneider Electric
servo motor BMH
Product or component type : Servo motor
Device short name : BMH
Maximum mechanical speed : 8000 rpm
Continuous stall torque :
a) 2.5 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
b) 2.5 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
Peak stall torque :
a) 7.4 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
b) 7.4 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
Nominal output power :
a) 700 W for LXM32.D12N4 at 3 A, 400 V, three phase
b) 700 W for LXM32.D12N4 at 3 A, 480 V, three phase
Nominal torque :
a) 2.2 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
b) 2.2 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
Nominal speed :
a) 3000 rpm for LXM32.D12N4 at 3 A, 400 V, three phase
b) 3000 rpm for LXM32.D12N4 at 3 A, 480 V, three phase
Product compatibility : LXM32.D12N4 at 400...480 V three phase
Shaft end : Keyed
IP degree of protection : IP54 standard
Speed feedback resolution : 32768 points/turn
Holding brake : With
Mounting support : International standard flange
Electrical connection : Rotatable right-angled connectors
Range compatibility : Lexium 32
[Us] rated supply voltage : 480 V
Network number of phases : Three phase
Continuous stall current : 2.94 A
Continuous power : 1.51 W
Maximum current Irms : 9.7 A for LXM32.D12N4
Maximum permanent current : 9.68 A
Second shaft : Without second shaft end
Shaft diameter : 11 mm
Shaft length : 23 mm
Key width : 18 mm
Feedback type : Single turn SinCos Hiperface
Holding torque : 3 N.m holding brake
Motor flange size : 70 mm
Number of motor stacks : 2
Torque constant : 0.84 N.m/A at 120 °C
Back emf constant : 54.08 V/krpm at 120 °C
Number of motor poles : 10
Rotor inertia : 1.24 kg.cm²
Stator resistance : 3.8 Ohm at 20 °C
Stator inductance : 12.2 mH at 20 °C
Stator electrical time constant : 3.2 ms at 20 °C
Maximum radial force Fr :
a) 710 N at 1000 rpm
b) 560 N at 2000 rpm
c) 490 N at 3000 rpm
d) 450 N at 4000 rpm
e) 410 N at 5000 rpm
f) 390 N at 6000 rpm
Maximum axial force Fa : 0.2 x Fr
Brake pull-in power : 7 W
Type of cooling : Natural convection
Length : 193 mm
Centring collar diameter : 60 mm
Centring collar depth : 2.5 mm
Number of mounting holes : 4
Mounting holes diameter : 5.5 mm
Circle diameter of the mounting holes : 82 mm
Product weight : 3.3 kg
Shipping weight : 4 kg
