Estimated lead time: 1-10 working days
Product or component type: Servo motor
device short name: BMH
Maximum mechanical speed: 8000 rpm
Continuous stall torque:
1) 1.2 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase
2) 1.2 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase
3) 1.4 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
4) 1.4 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
Peak stall torque:
1) 4.2 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase
2) 4.2 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase
3) 4.2 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
4) 4.2 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
Nominal output power:
1) 350 W for LXM32.U60N4 at 1.5 A, 400 V, three phase
2) 350 W for LXM32.U60N4 at 1.5 A, 480 V, three phase
3) 700 W for LXM32.D12N4 at 3 A, 400 V, three phase
4) 700 W for LXM32.D12N4 at 3 A, 480 V, three phase
Nominal torque:
1) 1.1 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase
2) 1.1 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase
3) 1.3 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
4) 1.3 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
Nominal speed:
1) 3000 rpm for LXM32.U60N4 at 1.5 A, 400 V, three phase
2) 3000 rpm for LXM32.U60N4 at 1.5 A, 480 V, three phase
3) 5000 rpm for LXM32.D12N4 at 3 A, 400 V, three phase
4) 5000 rpm for LXM32.D12N4 at 3 A, 480 V, three phase
Product compatibility:
1) LXM32.U60N4 at 400...480 V three phase
2) LXM32.D12N4 at 400...480 V three phase
Shaft end: Keyed
IP degree of protection: IP54 standard
Speed feedback resolution: 32768 points/turn
Holding brake: Without
Mounting support: International standard flange
Electrical connection: Rotatable right-angled connectors
Range compatibility: Lexium 32
[Us] rated supply voltage: 480 V
Network number of phases: Three phase
Continuous stall current: 1.78 A
Continuous power: 1.05 W
Maximum current Irms:
1) 6 A for LXM32.U60N4
2) 6 A for LXM32.D12N4
Maximum permanent current: 5.97 A
Second shaft: Without second shaft end
Shaft diameter: 11 mm
Shaft length: 23 mm
Key width: 18 mm
Feedback type: Single turn SinCos Hiperface
Holding torque: 3 N.m holding brake
Motor flange size: 70 mm
Number of motor stacks: 1
Torque constant: 0.79 N.m/A at 120 °C
Back emf constant: 50.72 V/krpm at 120 °C
Number of motor poles: 10
Rotor inertia: 0.7 kg.cm²
Stator resistance: 8.3 Ohm at 20 °C
Stator inductance: 23.4 mH at 20 °C
Stator electrical time constant: 2.8 ms at 20 °C
Maximum radial force Fr:
1) 660 N at 1000 rpm
2) 520 N at 2000 rpm
3) 460 N at 3000 rpm
4) 410 N at 4000 rpm
5) 380 N at 5000 rpm
6) 360 N at 6000 rpm
Maximum axial force Fa: 0.2 x Fr
Brake pull-in power: 7 W
Type of cooling: Natural convection
Length: 161 mm
Centring collar diameter: 60 mm
Centring collar depth: 2.5 mm
Number of mounting holes: 4
Mounting holes diameter: 5.5 mm
Circle diameter of the mounting holes: 82 mm
Product weight: 2.6 kg
Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Height: 11.5 cm
Package 1 Width: 19.0 cm
Package 1 Length: 39.5 cm
Package 1 Weight: 2.688 kg
Unit Type of Package 2: S04
Number of Units in Package 2: 4
Package 2 Height: 30cm
Package 2 Width: 40cm
Package 2 Length: 60cm
Package 2 Weight: 11.423 kg
Warranty: 18 months
Shipping weight: 1kg
