Estimated Lead Time: 6-8 Weeks
2" (51MM) INTERNAL OPENING (HIGH CAPACITY)
V4297A are normally closed solenoid gas valve. Suitable for use on furnaces, ovens, atmospheric burners, commercial water heaters, roof-top make-up air units, power
burners, and commercial/industrial boilers.
V4297A are used with 120 Vac controllers.
Positive close off of gas flow when de-energized.
High valve spring force allows up to 0.7 psi back pressure at valve seat.
No inlet pressure influence at valve seat.
Inlet pressure changes do not affect ability to close valve.
Low operating noise.
Low rush-in current.
Upstream and downstream taps allows tapping and testing pressure points.
For use with the Integrated Valve Train.
Accepts C6097 Pressure Switch mounted directly to flange (upstream pressure tap only).
Dimensions (in.): 10 1/4 in. high x 5 3/4 in. wide x 5 5/8 in. deep
Dimensions (mm): 260 mm high x 147 mm wide x 143 mm deep
Materials: Body--Die-cast aluminum
Mounting: Directly bolted to Integrated Valve Train Components
Frequency: 50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.: Listed: File No. MH18476, V1, S1 - Guide No. YIOZ
Approvals, CSA: Certificate No. 158158-1154280, Guide No. C3371-03, 04, 83
Electrical Connections: Screw terminals
Voltage: 110 Vac; 120 Vac
Operating Temperature Range (F): -40 F to +130 F
Operating Temperature Range (C): -40 C to +54 C
Approvals, Swiss RE: Acceptable
Current Ratings: 0.5 max amps at rated Vac/Hz
Body Pattern: Straight-through, non-offset
Pressure Ratings (psi): 5 psi
Pressure Ratings (kPa): 34.5 kPa
Pressure Tapping: Inlet and outlet pressure taps-- 1/4 in. NPT
Type of Fuel: Air; natural; manufactured; mixed; LP
Pipe Size (inch): 3/4 in. to 2 in.
Pipe Size (DN): DN20 or DN25 or DN32 or DN40 or DN50
Capacity (cfh): 1190 cfh; 1460 cfh; 2260 cfh; 2735 cfh; 3060 cfh
Valve Opening Time: less than 1 sec
Valve Closing Time: less than 1 sec
Flanges: Required, Order Separately
Integrated Valve Train Body Size: Small body, large flow