2 in. NPT Solenoid, N.C. Gas Valve
V4295A/V8295A normally closed and V4295S/V8295S normally open (vent) solenoid gas valves, are suitable for furnaces, ovens, atmospheric burners, commercial
water heaters, roof-top make-up air units, power burners, and commercial/industrial boilers.
V8295A,S are used with 24 Vac controllers.
V4295A,S are used with 120 Vac controllers.
Positive close off of gas flow when de-energized.
High valve spring force allows up to 0.7 psi back pressure at valve seat.
No inlet pressure influence at valve seat.
Inlet pressure changes do not affect ability to close valve.
Low operating noise.
Low rush-in current.
Upstream and downstream taps allows tapping and testing pressure points.
Dimensions (in.):8 3/8 in. high x 6 11/16 in. wide x 5 3/8 in. deep
Dimensions (mm): 213 mm high x 170 mm wide x 137 mm deep
Materials: Body--Die-cast aluminum
Mounting: Vertical to 90 degrees from vertical
Frequency : 50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.: Listed: File No. MH18476, V1, S1 - Guide No. YIOZ
Approvals, CSA: Certificate No. 158158-1154280, Guide No. C3371-03, 04, 83
Electrical Connections: Screw terminals
Voltage: 120 Vac
Operating Temperature Range (F): -40 F to +140 F
Operating Temperature Range (C): -40 C to +60 C
Approvals, Control Safety Devices: Acceptable
Approvals, Swiss RE: Acceptable
Approvals, Factory Mutual: Approved: Report No. J.I.OD6A2.AF
Current Ratings: 0.525 max amps at rated Vac/Hz
Body Pattern: Straight-through, non-offset
Pressure Ratings (psi): 2 psi
Pressure Ratings (kPa): 13.8 kPa
Capacity (m³/hr): 98.1 m3/hr
Pressure Tapping:Inlet and outlet pressure taps-- 1/4 in. NPT
Type of Fuel:Air; natural; manufactured; mixed; LP
Pipe Size (inch):2 in.
Pipe Size (DN):DN50
Capacity (cfh):3465 cfh
Valve Opening Time: less than 1 sec
Valve Closing Time: less than 1 sec