RE13-SAC | SICK Sensors | Non-contact safety switches RE1

Estimated Lead Time : 4-6 Weeks

Manufacturer : Selet Sensor

Non-contact safety switches

RE1

Type:RE13-SAC

Part number: 1059503

System part : Sensor and actuator

Sensor principle : Magnetic

Number of N/O contacts : 2

Number of N/C contacts : 0

Number of signaling contacts : 0

Safe switch on distance S_ao : 7 mm

Safe switch off distance S_ar : 20 mm

Active sensor surfaces : 1

Actuation directions : 3

B_10d parameter : 2 x 10⁷ switching cycles (with small load)

Type : Type 4 (EN ISO 14119)

Actuator coding level : Low coding level (EN ISO 14119)

Safe state in the event of a fault : The switch has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit.

Connection type : Plug connector, M8, 4-pin

Type of output : Reed contacts

Switching voltage : ≤ 30 V DC

Switching current : ≤ 100 mA

Design : Rectangular

Dimensions (W x H x D) : 26 mm x 36 mm x 13 mm

Weight : 0.1 kg

Housing material : Glass-fiber reinforced PPS

Enclosure rating : IP67 (IEC 60529)

Ambient operating temperature : –20 °C ... +60 °C

Storage temperature : –20 °C ... +60 °C

Vibration resistance : 10 Hz ... 55 Hz, 1 mm (EN 60947-5-3)

Shock resistance : 30 g, 11 ms (EN 60947-5-3)

Shipping Weight : 1 Kg