Mitsubishi Electric Q 173 DSCPU

Mitsubishi Electric Q 173 DSCPU

Your Price: $2,815.40
Retail Price:$3,238.00
Your Savings:$422.60(13%)
Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Part Number:Q173DSCPU

Condition : Brand New

Warranty : 12 months 

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.

  • Estimated Lead Time : In stock. Usually ships in 7-10 working days.

  • Manufacturer : Mitsubishi Electric

  • Q173DSCPU

  • Q 173 DSCPU

  • Number of control axes : Up to 32 axes (1 system max. 16 axes x 2)

  • Operation cycle (calculation cycle setting) : 0.22 ms, 0.44 ms, 0.88 ms, 1.77 ms, 3.55 ms, 7.11 ms

  • Interpolation function : Linear interpolation (maximum 4 axes), circular interpolation (2 axes), helical interpolation (3 axis)

  • control method : PTP (Point To Point) control, speed control, speed / position switching control, constant size feed, uniform speed control, position following control, fixed position stop speed control, speed switching control, high speed oscillation control, synchronous control (SV 22 Control method / virtual mode switching method)), cam control (SV 22), speed / torque control

  • Acceleration / deceleration processing : Trapezoidal acceleration / deceleration, S-shaped acceleration / deceleration, advanced S-shaped acceleration / deceleration

  • Correction function : Backlash compensation, electronic gear, phase correction (SV 22)

  • Programming language : Motion SFC, dedicated command, mechanical mechanism program (SV 22)

  • Servo program capacity : 16 k steps

  • Positioning points : 3200 points (indirect specification possible)

  • Peripheral device interface Motion CPU (section) : PERIPHERAL I / F

  • PLC CPU (part) : USB, RS-232, Ethernet

  • Origin return function : Dog cradle type, stopper stop type (2 types), limit switch combination type, scale origin signal detection type, dogless origin signal (2 types), near point dog type (2 types), count type (3 types), data set type Reference for

  • (with home return retry function, with origin shift function)

  • JOG operation function : There

  • Manual pulsar operation function : 3 units can be connected (when using Q173DPX), 1 unit can be connected (when using internal I / F) * 5

  • Speed ??/ torque control : Speed ??control not including position loop, torque control, push control

  • Multi-CPU synchronization control : Maximum 96 axes (when using 3 Q173 DSCPUs)

  • Synchronous encoder operation function : 12 units can be connected (when using SV 22 ) (Q 173 DPX + Q 172 DEX + internal I / F + device * 6 + via servo amplifier * 6)

  • M code function : M code output function available, M code completion waiting function available

  • Limit switch output function : Number of output points: 64 points (advanced control method), 32 points (virtual mode switching method, when SV 13 is used) Watch data: motion control data, word device

  • ROM operation function : There

  • External input signal : Q172 DLX (FLS, RLS, STOP, DOG), external input signals (FLS, RLS, DOG) of the servo amplifier, internal I / F (DI), bit device

  • High-speed read function * 6 : Yes (input unit, internal I / F, Q172DEX, through tracking of Q173DPX)

  • Mark detection function : Always mode, specified times mode, ring buffer mode

  • Mark detection signal : 4 points (built-in I / F), bit device, Q 172 DLX DOG signal

  • Mark detection setting : 32 setting

  • Torque limit value changing function : Forward torque limit value, negative direction torque limit value

  • Target position change function : There

  • Servo parameter changing function : There

  • Servo amplifier control mode switching function : Gain switching function, PI-PID control, control loop control (full closed / semi closed) control mode change

  • Optional data monitoring function : 6 Setting / axis (when using MR-J4-B, SSCNET III / H)

  • Emergency stop : Emergency stop of motion controller (EMI terminal, system setting), forced stop terminal of servo amplifier

  • Number of input / output points : A total of 256 points (built-in I / F (input 4 points) + I / O unit + intelligent function unit)

  • Clock setting : There

  • Security function : Password registration, password in units of motion SFC program, soft security key function

  • All clear function : Erase all user data in motion CPU

  • Remote operation : Remote RUN / STOP, remote latch clear

  • Digital oscilloscope function : Bit data 16 ch, word data 16 ch * 4

  • Driver communication function : There

  • No amplifier operation function : There

  • Absolute position system : Supported by installing a battery in the servo amplifier (Absolute method / increment method can be specified for each axis)

  • SSCNET III / H Number of lines * 1 : Two systems

  • Number of motion units installed : Q172 DLX available 4 Q172DEX available 6 ※ 2 Q173DPX can be used 4 ※ 3

  • Unit specification :

  • Number of control axes : Up to 32 axes

  • Servo amplifier connection method : SSCNET III / H (2 lines)

  • Total extension distance (maximum) [m] : SSCNET III / H: 1600, SSCNET III: 800

  • Inter-station distance (maximum) [m] : SSCNET III / H: 100, SSCNET III: 50

  • Peripheral device interface : PERIPHERAL I / F (motion CPU), USB / RS-232 / Ethernet (via PLC CPU)

  • Manual pulsar operation function : Three manual pulse generators can be used

  • Synchronous encoder operation function : 12 synchronous encoders can be used * 7 (when SV 22 is used)

  • Manageable unit Q 172 DLX : Up to 4 units / CPU

  • Q 172 DEX : Up to 6 units / CPU (when using SV 22)

  • Q 173 DPX : Up to 4 units / CPU (When INC synchronous encoder is used with SV22) Maximum 1 unit / CPU (when using only manual pulse generator)

  • Q173DSXY : Up to 3 units

  • I / O unit : Total maximum 256 points / CPU

  • Analog unit : Total maximum 256 points / CPU

  • QI 60 : Up to 1 unit / CPU

  • General purpose input signal Number of input points : 4 points

  • Input method : Plus Common / Minus Common (Photocoupler Isolated)

  • Rated input voltage / current : DC 24 V / about 5 mA

  • Operating voltage range : DC 20.4 to 26.4 V (+ 10% / - 15%, ripple ratio within 5%)

  • ON voltage / current : DC 17.5 V or more / 3.5 mA or more

  • OFF voltage / current : DC 5 V or less / 0.9 mA or less

  • Input resistance : About 5.6 kΩ

  • Response time : 1 ms or less (OFF → ON, ON → OFF)

  • Recommended wire size : AWG 18 to AWG 22

  • Emergency stop input signal Number of input points : 1point

  • Input method : Sink / source (photo coupler insulation)

  • Rated input voltage / current : DC 24 V / about 2.4 mA

  • Operating voltage range : DC 20.4 to 26.4 V (+ 10% / - 15%, ripple ratio within 5%)

  • ON voltage / current : DC 17.5 V or more / 2.0 mA or more

  • OFF voltage / current : DC 1.8 V or less / 0.18 mA or less

  • Input resistance : About 10 kΩ

  • Response time : 1 ms or less (OFF → ON, ON → OFF)

  • Recommended wire size : AWG 22

  • Manual pulsar / incremental synchronous encoder signal Signal input form : A phase / B phase (4 multiplication)

  • Maximum input pulse frequency : 1 Mpps (Up to 4 Mpps after multiplication by 4) (Differential output type) 200 kpps (Up to 800 kpps after multiplication by 4) (Voltage output / open collector type)

  • Extension base stage number : Up to seven steps

  • DC 5 V Internal current consumption [A] : 1.75

  • Mass [Kg] : 0.38

  • Dimensions [mm] : 120.5 (H) x 27.4 (W) x 120.3 (D)

  • Shipping Weight : 1.4 Kg

Reward Points

Edit

2815 points will be rewarded to you when you buy this item.

Related Items

 

Recently Viewed Items