13% off
ProSoft | PLX31-EIP-MBS | EtherNet/IP To Modbus Serial Gateway
ProSoft | PLX31-EIP-MBS | EtherNet/IP To Modbus Serial Gateway

ProSoft | PLX31-EIP-MBS | EtherNet/IP To Modbus Serial Gateway

Estimated Lead Time : 8 - 10 weeks
  • Estimated Lead Time : 8-10 weeks.

  • Manufacturer : ProSoft

  • Power Supply : 24 VDC nominal. 10 to 36 VDC allowed. Positive, Negative, GND Terminals

  • Current Load : 24 VDC nominal @ 300 mA. 10 to 36 VDC @ 610 mA maximum.

  • Operating Temperature : -25°C to 70°C (-13°F to 158°F)

  • Storage Temperature : -40°C to 80°C (-40°F to 176°F)

  • Vibration : IEC 60068-2-6; 5G @ 10 to 150 Hz

  • Relative Humidity : 5% to 95% RH with no condensation

  • LED Indicators : Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), Module Configuration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit Serial Communication Port Receive (RX) and Transmit (TX)

  • Ethernet Port : 10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency is less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration

  • Number of Serial Ports : 1

  • Serial Port Isolation : 2500 Vrms port signal isolation per UL 1577 serial port communication signal uses RF (Radio Frequency) modulation signal as isolation media, IC chip model is SiliconLabs Si844x (Si8440,Si8441,Si8442)

  • Dimensions (H x W x D),approx : 13.67 x 5.05 x 11.13 cm

  • Shipping Weight : 2 Kg

Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
There are no reviews for this product!

Reward Points

1994 points will be rewarded to you when you buy this item.

Related Items

Feature 5


Recently Viewed Items

Legal Disclaimer

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.