NR2-MNPNNNNN | Nippo | Temperature Controller * SAME DAY DELIVERY - 4 UNIT ONLY*

Same Day Shipping

Manufacturer: Nippo

Part Number: NR2-MNPNNNNN

Dimensions: It has a standard industrial panel meter size of 48 x 96 x 100mm.

Front Face Panel: It typically has a Black front panel.

RS485 serial interface (initial factory setting only): None

• Control Output 1 (Standard): The initial factory setting for the primary control output is a Relay contact output. This is commonly used to switch a heater or other device On/Off or as part of a PID control strategy.

• Control Output 2 (Standard): The initial factory setting is None.

• Alarm Outputs (ALM1 & ALM2):

  • Alarm Output 1 (ALM1): Includes a Relay contact output.

  • Alarm Output 2 (ALM2): The initial factory setting is None.

    • • Transmission output (initial factory setting only): None

      • Heater failure alarm (initial factory setting only): None

      • Event input (initial factory setting only): None

    • It operates as a Temperature Controller, managing a system's thermal process to keep the temperature stable at a user-defined set pointDisplay: It's likely a digital controller with a display to show the process value and set point.

Sensing: It receives a signal from a temperature sensor (like a thermocouple or RTD), which represents the current temperature, or the Process Value (PV).

Comparison: It compares the PV to the desired temperature, the Set Point (SP).

Correction: Based on the difference (the error), it uses control algorithms (like PID or ON/OFF control) to calculate the required control action.

Actuation: It outputs a signal (in this model, primarily a relay contact) to an external device (like a solid-state relay, heater, or valve) to adjust the power or flow, ultimately bringing the temperature back to the Set Point.

Shipping Weight : 1 Kg