NBN40-L2-B3B-V1 | Pepperl+Fuchs | Part number : 226321

Estimated Lead Time : 4-6 Weeks

Manufacturer : Pepperl+Fuchs

NBN40-L2-B3B-V1

Inductive sensor NBN40-L2-B3B-V1

40 mm non-flush

A/B slave with extended addressing possibility for up to 62 slaves

Sensor head bidirectional and rotatable

NO/NC programmable

Oscillator monitoring

On/Off delay (disconnectable)

Switching function : Normally open/closed (NO/NC) programmable

Output type : AS-Interface

Rated operating distance : 40 mm

Installation : non-flush

Assured operating distance : 0 ... 32.4 mm

Reduction factor rAl : 0.3

Reduction factor rCu : 0.3

Reduction factor r304 : 0.75

Slave type : A/B slave

AS-Interface specification : V3.0

Required master specification : ≥ V2.1

Nominal ratings

Operating voltage : 26.5 ... 31.9 V via AS-i bus system

Switching frequency : 0 ... 50 Hz

Hysteresis : typ. 5 %

Reverse polarity protection : reverse polarity protected

No-load supply current : ≤ 25 mA

Operating voltage indicator : LED, green

Switching state indicator : LED, yellow

Error indicator : LED, red

Functional safety related parameters

MTTFd : 1330 a

Mission Time (TM) : 20 a

Diagnostic Coverage (DC) : 0 %

Approvals and certificates

UL approval : cULus Listed, General Purpose

CSA approval : cCSAus Listed, General Purpose

CCC approval : CCC approval / marking not required for products rated ≤36 V

Ambient conditions

Ambient temperature : -25 ... 70 °C (-13 ... 158 °F)

Storage temperature : -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection type : Connector M12 x 1 , 4-pin

Housing material : PA

Sensing face : PA

Degree of protection : IP69K

Mass : 210 g

Shipping Weight : 1.5 Kg