13% off
M6294F1009-F/U | Honeywell | SERIES 2 MOD IV MOTOR
M6294F1009-F/U | Honeywell | SERIES 2 MOD IV MOTOR

M6294F1009-F/U | Honeywell | SERIES 2 MOD IV MOTOR

Estimated Lead Time : 6-8 Weeks
  • : 1

NII REF No : IAFD111411051121
  • Estimated Lead Time: 6-8 weeks

  • M6294F1009-F/U

  • Honeywell Modutrol IV servo motors

  • Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves.

  • M62xx models are three-wire floating control motors for use with controllers that provide a switched spdt or floating output and have an internal electrically

  • isolated feedback potentiometer that provides indication of the motor shaft position.

  • M72xx models accept a current or voltage signal from an electronic controller to position the motor shaft to any point between open and closed.

  • M91xx and M94xx models use a 135Ohm modulating proportional signal to position the motor shaft to any point between open and closed.

  • Modutrol IV motors are used for damper and valve control in industrial burner applications and air handling installations.

  • Approvals: CE, UL, FM, CSA, EAC

  • Protection class: IP44

  • Weather protection kit is available as accessory to upgrade to IP54

  • Ambient temperature: -40...66C

  • Maximum humidity: 85%rh

  • Features: Screw terminals are standard.

  • Adapter bracket for matching shaft height of older motors (ModIII) is available.

  • Most models have field adjustable stroke (90 to 160).

  • Die-cast aluminium housing.

  • Two adjustable internal SPDT auxiliary switches are factory mounted.

  • Dual shaft ends for normally open or normally closed valve or damper application. Both shaft ends offer the same torque rating.

  • Modutrol motor timings are independant of line frequency.

  • Torque ratings for dual-ended shaft motors are the sum of the shaft torques (power-end torque plus auxiliary-end torque).

  • Breakaway torque is the maximum torque available to overcome occasional large loads such as a seized damper or valve.

  • The breakaway torque is 1.5x the normal rated torque.

  • Other models than listed in this catalogue are available outside Europe.

  • Most models can be replaced by the available European models.

  • Input voltage: Default: 24 Vac

  • Via optional built-in transformer: 24/120/230 Vac

  • Line frequency: 50/60 Hz

  • Shaft mounting: 9.5mm (3/8") square for all models on both ends

  • End switches: 2

  • Function: Normally Closed

  • 3-point control non-spring return (M62x4)

  • Supply voltage: 24 Vac

  • Power consumption: 11W

  • Input signal: SPDT

  • Angle of rotation: Adj. 90 .. 160o

  • Comment: Factory set at 160

  • Runtime: Var. 120..214s

  • Torque: 34Nm

  • Position feedback: 10kohm

  • Note: Linear feedback

  • Model: Series 2

  • Shipping Weight: 4 Kg

Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
There are no reviews for this product!

Reward Points

828 points will be rewarded to you when you buy this item.

Related Items


MOQ: 1

Feature 5

USD 517.44112 X1.6 - alex skype fadiah 14052021

Recently Viewed Items

Legal Disclaimer

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.