High speed output adapter FX 3 U - 2 HSY - ADP

High speed output adapter FX 3 U - 2 HSY - ADP

Your Price: $515.20
Retail Price:$592.00
Your Savings:$76.80(13%)

Condition : Brand New

Warranty : 12 months 

Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Part Number:FX3U-2HSY-ADP
You need to be a registered customer to order this product. Please Login to your account or click here to Register.

Sign in with Facebook
  • Estimated Lead Time : In stock. Usually ships in 7-10 working days.

  • Manufacturer : Mitsubishi Electric

  • FX3U-2HSY-ADP

  • High speed output adapter FX 3 U - 2 HSY - ADP

  • Number of control axes : Independent 2 axes (2 units connected and independent 4 axes controllable)

  • Pulse output method : Differential line driver system

  • Pulse output form : Pulse train + direction, forward rotation / reverse rotation pulse train

  • Maximum frequency : 200 kHz

  • Acceleration / deceleration processing : Depending on the sequence program

  • Control unit : pulse

  • Positioning range : Depending on the sequence program

  • Programming language : Sequence program

  • Position data : 1 point (set by sequence program)

  • Absolute position detection (ABS current value reading) : Use sequencer's ABS command

  • Number of occupied I / O points : When connecting one FX 3 U - 2 HSY - ADP, use the outputs Y000, Y001, Y004, Y005 of the basic unit. In the case of connecting two units, use the outputs Y000 to Y007 of the basic unit.

  • Application sequencer : FX3U

  • mass : 0.08 Kg

  • Power-supply voltage : DC 5 V 30 mA ( internal power supply from the sequencer ) DC 24 V 60 mA ( internal power supply from the service power supply of the sequencer)

  • Number of output points : When 4 points are connected: Y000, Y001, Y004, Y005 are assigned. When two units are connected: Y000 to Y007 are assigned. (FX 3 U - 2 HSY - ADP Output terminals of the sequencer body with the same number can not be used.)

  • Output form : You can select forward rotation (FP) / reverse rotation (RP) or pulse (PLS) / direction (DIR).

  • Output method : Differential line driver output

  • Output frequency : 200 kHz

  • Operation indication : LED on when output is ON

  • Ambient temperature : 0 to 55 ° C. ... Operating, -25 to 75 ° C. ..... Save

  • Relative humidity : 5 to 95% RH (noncondensing).... in operation

  • Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)

  • Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)

  • Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)

  • Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)

  • Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse

  • Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si

  • tor with period of 30 to 100 Hz

  • Withstand voltage : High-speed output Between the output terminal of the special adapter and the earth terminal of the PLC main unit: AC 500 V for 1 minute

  • Insulation resistance : High-speed output Between the output terminal of the special adapter and the earth terminal of the programmable controller main body: 500 MV DC, 5 MΩ or more with the insulation resistance meter

  • Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious

  • Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.

  • Shipping Weight : 1 Kg

Related Items

Recently Viewed Items