Analog output board FX1N - 1DA - BD

Analog output board FX1N - 1DA - BD

Your Price: $71.40
Retail Price:$82.00
Your Savings:$10.60(13%)
Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Part Number:FX1N-1DA-BD

Condition : Brand New

Warranty : 12 months 

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.

  • Estimated Lead Time : In stock. Usually ships in 7-10 working days.

  • Manufacturer : Mitsubishi Electric

  • FX1N-1DA-BD

  • Analog output board FX1N - 1DA - BD

  • Analog output Analog output range Voltage output : DC 0 V to 10 V (external load resistance 2 kΩ to 1 MΩ)

  • Current output : DC 4 mA to 20 mA (external load resistance 500 Ω or less)

  • Number of output channels : 1 channel

  • Output characteristics : Output characteristics can not be adjusted.

  • Digital input Voltage output : 12 bit binary

  • Current output : 11 bit binary

  • resolution Voltage output : 2.5 mV (10 V x 1/4000)

  • Current output : 8 μA (16 mA X 1/2000)

  • Overall precision Voltage output : ± 1% (± 0.1 V) for full scale 10 V

  • Current output : ± 1% (± 0.16 mA) for full scale 16 mA

  • D / A conversion time : Approximately 10 ms (D / A conversion started with the END instruction, output after approximately 10 ms)

  • Insulation method : No isolation between analog input and sequencer, between channels

  • Number of occupied I / O points : 0 point (It does not relate to the maximum input / output point number of the sequencer)

  • Application sequencer : FX 1 S (V 2.0 or later), FX 1 N (V 2.0 or later)

  • Power supply : Internal power supply from the sequencer

  • Ambient temperature : 0 to 55 ° C. ... Operating -20 to 70 ° C. ... Save

  • Relative humidity : 35 to 85% RH (noncondensing)...at operation

  • Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : Amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)

  • Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)

  • Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)

  • Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)

  • Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse

  • Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si

  • tor with period of 30 to 100 Hz

  • Withstand voltage : Non-insulated between analog output part and PLC main body (Do not perform withstand voltage test)

  • Insulation resistance : Non-insulated between the analog output part and the programmable controller (Do not conduct the insulation resistance test)

  • Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious

  • Use altitude : It can not be used under an environment pressurized to 2,000 m or less under atmospheric pressure. It may break down.

  • Shipping Weight : 1.5 Kg

Reward Points

Edit

71 points will be rewarded to you when you buy this item.

Related Items

 

Recently Viewed Items