FS-V31P|Fiber Amplifier,PNP | FS-V30 series | KEYENCE

FS-V31P

Digital Fiber Optic Sensors

FS-V30 series

Fiber Amplifier

Cable Type

Main Unit

PNP

1-output with cable

Main unit

Control output:1 output

Monitor output (1 to 5 V):N/A

Light source LED:Red, 4-element LED (Wavelength: 640 nm)

Response time:33 ?s (HIGH SPEED)/250 ?s (FINE)/500 ?s (TURBO)/1 ms (SUPER TURBO)/4 ms (ULTRA TURBO)/16 ms (MEGA TURBO)

Output selection:LIGHT-ON/DARK-ON (switch-selectable)

Display indicator:Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display,

Preset Value (4-digit green LED indicator) and

Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512;

Excess gain: 0P to 999P,

Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations

Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

Detection mode:Light intensity (area detection possible, automatic sensitivity-tracking function provided)

Timer function:OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay

timer/ON-delay timer + One-shot timer, selectable

Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.

Control output:PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the

expansion unit(s) is connected), Residual voltage: 1 V max.

External inputy:Input time: 2 ms (ON)/20 ms (OFF) min.*2

Unit expansion:Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-

output type should be counted as two units.

Case material:Polycarbonate

Accessories:N/A

Shipping Weight: 1.1 Kg