Koyo Analog Output Module : F2-02DA-2L

F2-02DA-2L

Koyo Analog Output Module : F2-02DA-2L

Number of Channels 2

Output Ranges 0 to 5V, 0 to 10V, °5V, °10V

Resolution 12 bit (1 in 4096)

Output Type Single ended, 1 common

Peak Output Voltage :15VDC (clamped by transient voltage suppressor)

Load Impedance 2000 minimum

Load Capacitance .01°F maximum

Linearity Error (end to end) 1 count (0.025% of full scale) maximum

Conversion Settling Time 5s maximum (full scale change)

Full-Scale Calibration Error ( ff t i l d d)

• 12 counts max. unipolar @ 25_C (77_F)(offset error included)p @ ( )
  

• 16 counts max. bipolar @ 25_C (77_F)
  

Offset Calibration Error

• 3 counts maximum @ 25_C ( 77_F) unipolar
  

Accuracy vs. Temperature °50 ppm/_C full scale calibration change

(including maximum offset change of 2 counts)

Maximum Inaccuracy Unipolar ranges

• 0.3% @ 250C (77°F)
  

Bipolar ranges

• 0.4% @ 25°C (77°F)

• 0.55% 0--60°C (32--140°F)
  

PLC Update Rate 1 channel per scan maximum (D2--230 CPU)

2 channels per scan maximum (D2--240/250--1/

260 CPU)

Digital Outputs Digital Outputs 12 binary data bits, 2 channel ID bits, 1 sign bit

Output Points Required

12 binary data bits, 2 channel ID bits, 1 sign bit16 point (Y) output module

Power Budget Requirement 40 mA @ 5 VDC (supplied by base)

External Power Supply F2--02DA--2: 18-30 VDC, 60 mA (outputs fully loaded)

F2--02DA--2L: 10-15 VDC, 70 mA (outputs fully loaded)

Operating Temperature 0 to 60_ C (32 to 140 F)

Storage Temperature --20 to 70_ C (--4 to 158 F)

Relative Humidity 5 to 95% (non-condensing)

Environmental Air No corrosive gases permitted

Vibration MIL STD 810C 514.2

Shock MIL STD 810C 516.2

Noise Immunity NEMA ICS3--304

Shipping Weight: 1.2 kg