13% off
Omron E32-D61 2M
Omron E32-D61 2M

Omron E32-D61 2M

0
0
5
USD186.00
USD214.00
USD28.00(13%)
Estimated Lead Time : 4-6 WEEKS
E32-D61 2M
Omron
  • Estimated Lead Time: 4-6 Weeks

     

  • Manufacturer: Omron

  • E32-D61 2M

  • Type: Environment resistive models

  • Heat resistant

  • Standard models

  • The Standard for Fiber Amplifiers with Simple Operation and High Performance

  • Operation so simple that essentially anyone can use the amplifier right way.

  • Immediately determine operation and amount of light with a simple, bright display.

  • General-purpose capabilities to simply handle a broad range of applications.

  • Models with connectors have a dielectric strength of 500 VAC.

  • Light source (wavelength): Red LED (620 nm)

  • Power supply voltage: 12 to 24 VDC ±10%, ripple (p-p): 10% max.
    960 mW max. (Power supply: 2 4 V, Current consumption: 40 mA max.)

  • Current consumption Light source (wavelength): Red LED (620 nm)

  • Current consumption Power supply voltage: 12 to 24 VDC ±10%, ripple (p-p): 10% max.

  • Current consumption Current consumption: 960 mW max. (Power supply: 24 V, Current consumption: 40 mA max.)

  • Current consumption Control output: Open-collector output (NPN or PNP)
    Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.)
    Light-ON/Dark-ON mode selector

  • Current consumption Response time: Operate or reset: 200 s max.

  • Current consumption Sensitivity adjustment: UP/DOWN direct key setting, teaching

  • Current consumption Protection circuits: Power supply reverse polarity protection, output short-circuit protection, output
    reverse polarity protection

  • Current consumption Timer function: ON/OFF-delay timer: 10 ms (each fixed)

  • Current consumption Mutual interference
    prevention:
    Up to 5 Amplifiers (optically synchronized)

  • Current consumption Ambient illumination: Receiver side
    Incandescent lamp: 10,000 lux max.
    Sunlight: 20,000 lux max.

  • Current consumption Ambient temperature range: Operating:
    Groups of 1 to 3 Amplifiers: -25°C to 55°C
    Groups of 4 to 11 Amplifiers: -25°C to 50°C
    Groups of 12 to 16 Amplifiers: -25°C to 45°C
    Storage: -30°C to 70°C (with no icing or condensation)

  • Current consumption Ambient humidity range: Operating and storage: 35% to 85% (with no condensation)

  • Current consumption Insulation resistance: 20 M . min. (at 500 VDC)

  • Current consumption Dielectric strength: 1,000 VAC at 50/60 Hz for 1 minute (*)

  • Current consumption Vibration resistance: Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z
    directions

  • Current consumption Shock resistance: Destruction: 500 m/s2, for 3 times each in X, Y and Z directions

  • Current consumption Degree of protection: IEC 60529 IP50 (with Protective Cover attached)

  • Current consumption Connection method: Pre-wired (standard cable length: 2 m), or connector

  • Material:Material Case: Polybutylene terephthalate (PBT)

     

  • Material Cover: Polycarbonate

  • Accessories: Instruction manual

  • Control output: Open-collector output (NPN or PNP)
    Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.)
    Light-ON/Dark-ON mode selector

  • Response time: Operate or reset: 200 s max.

  • Sensitivity adjustment: UP/DOWN direct key setting, teaching

  • Protection circuits: Power supply reverse polarity protection, output short-circuit protection, output
    reverse polarity protection

  • Timer function: ON/OFF-delay timer: 10 ms (each fixed)

  • Mutual interference
    prevention:
    Up to 5 Amplifiers (optically synchronized)

  • Ambient illumination: Receiver side
    Incandescent lamp: 10,000 lux max.
    Sunlight: 20,000 lux max.

  • Ambient temperature range: Operating:
    Groups of 1 to 3 Amplifiers: -25°C to 55°C
    Groups of 4 to 11 Amplifiers: -25°C to 50°C
    Groups of 12 to 16 Amplifiers: -25°C to 45°C
    Storage: -30°C to 70°C (with no icing or condensation)

  • Ambient humidity range: Operating and storage: 35% to 85% (with no condensation)

  • Insulation resistance: 20 M . min. (at 500 VDC)

  • Dielectric strength: 1,000 VAC at 50/60 Hz for 1 minute (*)

  • Vibration resistance: Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z
    directions

  • Shock resistance: Destruction: 500 m/s2, for 3 times each in X, Y and Z directions

  • Degree of protection: IEC 60529 IP50 (with Protective Cover attached)

  • Connection method: Pre-wired (standard cable length: 2 m), or connector

  • Weight (packed state): Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g

  • Material Case: Polybutylene terephthalate (PBT)

  • Material Cover: Polycarbonate

  • Accessories: Instruction manual

  • Shipping Weight: 1.1Kg

[short_review]
[long_review]
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
[rating]
There are no reviews for this product!

Reward Points

186 points will be rewarded to you when you buy this item.

Related Items

https://www.nexinstrument.com/assets/images/images/MitsubishiOmronSiemensHoneywell18012016/thumbnail/17.png

Recently Viewed Items

Legal Disclaimer

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.