Even though we have this part in stock, it may take several days for internal process to complete. Goods will be delivered within 5 -7 working days.
Unit type : CJ-series Special I/O Unit
Isolation *1 : Between I/O and Controller signals: Photocoupler (No isolation between I/O signals.)
External terminals : 18-point detachable terminal block (M3 screws)
Power consumption: 5 VDC, 140 mA max.
External power supply *2: 24 VDC (inrush current: 20 A max., pulse width: 1 ms min.)
External power supply *2 : 170 mA max.
Dimensions (mm): 31 × 90 × 65 mm (W × H × D)
Weight: 150 g max.
General specifications Conforms to general specifications for CJ-series Series
Output specifications Number of analog outputs: 8
Output signal range *3: 4 to 20 mA
Maximum permissible load resistance: 350 O
Resolution : 4,000/8,000 *8
Set data : 16-bit binary data
Accuracy*4 25°C: ±0.3% of F.S.
Accuracy*4 0°C to 55°C :±0.6% of F.S.
D/A conversion period *5: 1.0 ms or 250 µs per point *8
Output hold function:
Outputs the specified output status (CLR, HOLD, or MAX) under any of the following circumstances.
When the Conversion Enable Bit is OFF. *6
In adjustment mode, when a value other than the output number is output during adjustment. *7
When output setting value error occurs or Controller operation stops.
When the Load is OFF.
Scaling : Supported only for a conversion period of
1 ms and resolution of 4,000.
Setting values in any specified unit within a
range of ±32,000 as the upper and lower limits allows D/A conversion to be executed and analog signals to be output with these values as full scale.
Output functions Offset/gain adjustment: Supported
Shipping Weight: 1.2 Kg
Download PDF File