ATV12PU30M3 | Schneider | variable speed drive ATV12 - 3kW - 3 hp - 3ph - 200..240V - on base plate

ATV12PU30M3 | Schneider | variable speed drive ATV12 - 3kW - 3 hp - 3ph - 200..240V - on base plate

Your Price: $466.00
Estimated Lead Time : 3-4 Weeks
Part Number:ATV12PU30M3

Condition : Brand New

Warranty : 12 months 

NEX Instrument Inc is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers, the products of which are offered for sale on www.nexinstrument.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.

  • Estimated Lead Time: 3-4 Weeks

  • Manufacturer: Schneider

  • ATV12PU30M3

  • variable speed drive ATV12 - 3kW - 3 hp - 3ph - 200..240V - on base plate

  • Range of product : Altivar 12

  • Product or component type : Variable speed drive

  • Product destination : Asynchronous motors

  • Product specific application : Simple machine

  • Assembly style : On base plate

  • Component name : ATV12

  • Quantity per set : Set of 1

  • EMC filter : Without EMC filter

  • Built-in fan : Without

  • Network number of phases : Three phase

  • [Us] rated supply voltage : 200...240 V (- 15...10 %)

  • Motor power kW : 3 kW

  • Communication port protocol : Modbus

  • Line current : 15.9 A at 240 V
    19 A at 200 V

  • Speed range : 1...20

  • Transient overtorque : 150...170 % of nominal motor torque depending on drive rating and type of motor

  • Asynchronous motor control profile : Quadratic voltage/frequency ratio
    Sensorless flux vector control
    Voltage/frequency ratio (V/f)

  • IP degree of protection : IP20 without blanking plate on upper part

  • Noise level : 0 dB

  • Complementary

  • Supply frequency : 50/60 Hz (+/- 5 %)

  • Type of connector : 1 RJ45 for Modbus on front face

  • Physical interface : 2-wire RS 485 for Modbus

  • Transmission frame : RTU for Modbus

  • Transmission rate : 38400 bit/s
    19200 bit/s
    9600 bit/s
    4800 bit/s

  • Number of addresses : 1...247 for Modbus

  • Communication service : Read device identification (43)
    Read/write multiple registers (23), messaging: 4/4 words maximum
    Write multiple registers (16), messaging: 27 words maximum
    Write single register (06), messaging: 29 words maximum
    Read holding registers (03), messaging: 29 words maximum

  • Prospective line Isc : <= 5 kA

  • Continuous output current : 12.2 A at 4 kHz

  • Maximum transient current : 18.3 A for 60 s

  • Speed drive output frequency : 0.5...400 Hz

  • Nominal switching frequency : 4 kHz

  • Switching frequency : 4...16 kHz with derating factor
    2...16 kHz adjustable

  • Braking torque : Up to 70 % of nominal motor torque without braking resistor
    Up to 150 % of nominal motor torque with braking resistor at high inertia

  • Motor slip compensation : Adjustable
    Preset in factory

  • Output voltage : 200...240 V three phase

  • Electrical connection : L1, L2, L3, U, V, W, PA, PC terminal 5.5 mm² (AWG 10)

  • Tightening torque : 1.2 N.m

  • Insulation : Electrical between power and control

  • Supply : Internal supply for logic inputs 24 V DC, voltage limits 20.4...28.8 V, 100 mA for overload and short-circuit protection
    Internal supply for reference potentiometer 5 V DC, voltage limits 4.75...5.25 V, 10 mA for overload and short-circuit protection

  • Analogue input number : 1

  • Analogue input type : AI1 configurable voltage 0...5 V, impedance 30 kOhm
    AI1 configurable voltage 0...10 V, impedance 30 kOhm
    AI1 configurable current 0...20 mA, impedance 250 Ohm

  • Discrete input number : 4

  • Discrete input type : (LI1...LI4) programmable, 24 V, voltage limits 18...30 V

  • Discrete input logic : Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
    Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm

  • Sampling duration : < 10 ms for analogue input
    < 20 ms, tolerance +/- 1 ms for logic input

  • Linearity error : +/- 0.3 % of maximum value for analogue input

  • Analogue output number : 1

  • Analogue output type : (AO1) software-configurable current, analogue output range 0...20 mA, output impedance 800 Ohm, analogue output resolution 8 bits
    (AO1) software-configurable voltage, analogue output range 0...10 V, output impedance 470 Ohm, analogue output resolution 8 bits

  • Discrete output number : 2

  • Discrete output type : (R1A, R1B, R1C) protected relay output 1 C/O
    (LO+, LO-) logic output

  • Minimum switching current : 5 mA at 24 V DC for logic relay

  • Maximum switching current : 4 A at 30 V DC resistive load cos phi = 1 L/R = 0 ms for logic relay
    3 A at 250 V AC resistive load cos phi = 1 L/R = 0 ms for logic relay
    2 A at 30 V DC inductive load cos phi = 0.4 L/R = 7 ms for logic relay
    2 A at 250 V AC inductive load cos phi = 0.4 L/R = 7 ms for logic relay

  • Acceleration and deceleration ramps : Linear from 0 to 999.9 s
    S
    U

  • Braking to standstill : By DC injection, 0.1...30 s

  • Protection type : Thermal motor protection via the drive by continuous calculation of I²t
    Against input phase loss in three-phase
    Short-circuit between motor phases
    Overheating protection
    Overcurrent between output phases and earth
    Line supply undervoltage
    Line supply overvoltage

  • Frequency resolution : Display unit 0.1 Hz
    Analog input converter A/D, 10 bits

  • Time constant : 20 ms, tolerance +/- 1 ms for reference change

  • Marking : CE

  • Operating position : Vertical +/- 10 degree

  • Height : 184 mm

  • Width : 140 mm

  • Depth : 100.2 mm

  • Product weight : 1.6 kg

  • Environment

  • Electromagnetic compatibility : Voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11
    Surge immunity test (level 3) conforming to EN/IEC 61000-4-5
    Radiated radio-frequency electromagnetic field immunity test (level 3) conforming to EN/IEC 61000-4-3
    Immunity to conducted disturbances (level 3) conforming to EN/IEC 61000-4-6
    Electrostatic discharge immunity test (level 3) conforming to EN/IEC 61000-4-2
    Electrical fast transient/burst immunity test (level 4) conforming to EN/IEC 61000-4-4

  • Electromagnetic emission : Conducted emissions conforming to EN/IEC 61800-3
    Radiated emissions, class: environment 1 category C2 conforming to EN/IEC 61800-3 - test level: 2...16 kHz shielded motor cable

  • Product certifications : CSA
    C-Tick
    GOST
    NOM
    UL

  • Vibration resistance : 1.5 mm peak to peak (f = 3...13 Hz) drive unmounted on symmetrical DIN rail conforming to EN/IEC 60068-2-6
    1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6

  • Shock resistance : 15 gn for 11 ms conforming to EN/IEC 60068-2-27

  • Relative humidity : 5...95 % without dripping water conforming to IEC 60068-2-3
    5...95 % without condensation conforming to IEC 60068-2-3

  • Ambient air temperature for storage : -25...70 °C

  • Ambient air temperature for operation : 40...60 °C with current derating 2.2 % per °C
    -10...40 °C with protective cover from the top of the drive removed

  • Operating altitude : > 1000...3000 m with current derating 1 % per 100 m
    <= 1000 m without derating

  • Shipping Weight : 2.6 Kg

Reward Points

Edit

466 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items