71002895 | Endress+Hauser | Seal set / O-ring kit

Estimated Lead Time : 1 - 10 Working Days 

Manufacturer : Endress+Hauser 

Part Number: 71002895 

Description: Seal set / O-ring kit. 

Application: Used primarily for maintaining the process connection or internal sealing of E+H sensors (such as pH/ORP sensors, conductivity sensors, or certain flowmeter assemblies). 

Verification: This part is a consumable. If you are preparing a quote or a maintenance log, ensure you verify if the process medium (the liquid being measured) is compatible with the seal material (e.g., EPDM is good for steam/water, but FKM is better for oils/chemicals). 

Installation: These seals should be replaced whenever the sensor is removed for calibration or if there is any sign of "weeping" at the process connection. 

Documentation : For your website administration tasks, this part is often listed as a "Recommended Spare Part" under the "Accessories" section of the main instrument's manual (e.g., for a Promass flowmeter or a Liquisys transmitter). 

Material : Usually EPDM or Viton (FKM) (Check the specific datasheet for chemical compatibility). 

Quantity : Typically sold as a kit containing multiple O-rings or seals. 

Compatibility : Frequently used with the Cleanfit or Liquifit series (e.g., CPA series assemblies). 

Operating Temp : Dependent on the elastomer (EPDM: -40 to 140°C; FKM: -20 to 200°C). 

Shipping Weight : 1 Kg