Power supply unit - MINI-PS-100-240AC/10-15DC/2 - 2938756
Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 10 V DC ... 15 V DC/2 A
Width : 45 mm
Height : 99 mm
Depth : 107 mm
Degree of protection : IP20
Ambient temperature (operation) : -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport) : -40 °C ... 85 °C
Max. permissible relative humidity (operation) : ≤ 95 % (at 25 °C, non-condensing)
Noise immunity : EN 61000-6-2:2005
Nominal input voltage range : 100 V AC ... 240 V AC
Input voltage range : 85 V AC ... 264 V AC || 90 V DC ... 350 V DC
AC frequency range : 45 Hz ... 65 Hz
Current consumption : 0.4 A (120 V AC) || 0.2 A (230 V AC) || 0.4 A (90 V DC) || 0.1 A (350 V DC)
Inrush surge current : < 15 A (typical)
Power failure bypass : > 20 ms (120 V AC) || > 120 ms (230 V AC)
Input fuse : 2 A (slow-blow, internal)
Choice of suitable circuit breakers : 6 A ... 16 A (Characteristics B, C, D, K)
Nominal output voltage : 12 V DC ±1 % || 10 V DC ±1 % || 15 V DC ±1 %
Setting range of the output voltage (USet) : 10 V DC ... 15 V DC (> 12 V DC, constant capacity restricted)
Nominal output current (IN) : 2 A (-25 °C ... 60 °C)
POWER BOOST (IBoost) : 2.3 A (-25°C ... 40°C permanent )
Derating : 60 °C ... 70 °C (2.5%/K)
Connection in parallel : Yes, for assembling redundant systems and increasing efficiency
Connection in series : Yes
Residual ripple : < 20 mVPP (20 MHz)
Output power : 30 W
Typical response time : < 1 s
Peak switching voltages nominal load : < 100 mVPP (20 MHz)
Maximum power dissipation in no-load condition : < 1 W
Power loss nominal load max. : < 7 W
Net weight : 0.25 kg
Operating voltage display : Green LED
Efficiency : > 86 % (for 230 V AC and nominal values)
Insulation voltage input/output : 4 kV (type test) || 3 kV (Routine test)
Protection class : II (in closed control cabinet)
MTBF (IEC 61709, SN 29500) : > 507000 h (40°C)
Mounting position : horizontal DIN rail NS 35, EN 60715
Assembly instructions : Can be aligned: Horizontally 0 mm, vertically 50 mm
Connection method : Pluggable screw connection
Conductor cross section solid min. : 0.2 mm²
Conductor cross section solid max. : 2.5 mm²
Conductor cross section flexible min. : 0.2 mm²
Conductor cross section flexible max. : 2.5 mm²
Conductor cross section AWG min. : 24
Conductor cross section AWG max. : 12
Stripping length : 7 mm
Screw thread : M3
Electromagnetic compatibility : Conformance with EMC Directive 2004/108/EC
Noise emission : EN 55011 (EN 55022)
Noise immunity : EN 61000-6-2:2005
Connection in acc. with standard : CUL
Standard - Electrical safety : EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations : EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage : EN 60950-1 (SELV) || EN 60204 (PELV)
Standard - Safe isolation : DIN VDE 0100-410
Standard – Limitation of mains harmonic currents : EN 61000-3-2
UL approvals : UL/C-UL listed UL 508 || UL/C-UL Recognized UL 60950 || UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
Low Voltage Directive : Conformance with LV directive 2006/95/EC
Rail applications : EN 50121-4
Shipping Weight : 1 Kg